نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green DDR5 RDIMM modules with black chips no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 256GB (2×128GB) 4Rx4 CL46 1.1V Supermicro X14SDW-72C-SP9F memory upgrade

SKU CH-NWF5-4A858

256 GB DDR5-5600 ECC registered RDIMM kit (2×128 GB) validated for the Supermicro X14SDW-72C-SP9F motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

عرض 4 تكوينات إضافية
  • 256 GB total capacity from two 128 GB modules for maximum memory density
  • DDR5 5600 speed with PC5-44800 bandwidth for high-throughput server workloads
  • Registered ECC architecture with 4Rx4 organisation offloads the controller and corrects single-bit errors
  • 10 V operation at CL46 latency matches the platform's exact voltage and timing requirements
  • 288-pin RDIMM form factor validated for the Supermicro X14SDW-72C-SP9F motherboard

Targeted server memory upgrade

This 256GB kit contains two 128GB DDR5 RDIMM modules built for the Supermicro X14SDW-72C-SP9F motherboard. It is intended for administrators who need to maximise the memory capacity of that specific platform. The registered ECC design supports stable operation in multi-socket server environments.

Registered ECC with 4Rx4 organisation

The modules run at DDR5 5600 (PC5-44800) with a CAS latency of 46 at 1.1V. The 4Rx4 rank configuration and registered buffer match the memory controller requirements so the system recognises the full 256GB at rated speed. ECC corrects single-bit errors to prevent silent data corruption.

Two-module kit for full population

The package supplies exactly two 288-pin RDIMMs, allowing you to populate a matched pair of slots in one step. No heat spreaders are included, so airflow in dense server chassis remains unobstructed. The kit is validated for the named Supermicro board and is not compatible with UDIMM or SODIMM slots.

أبرز المميزات

  • 256 GB total capacity from two 128 GB modules for maximum memory density
  • DDR5 5600 speed with PC5-44800 bandwidth for high-throughput server workloads
  • Registered ECC architecture with 4Rx4 organisation offloads the controller and corrects single-bit errors
  • 10 V operation at CL46 latency matches the platform's exact voltage and timing requirements
  • 288-pin RDIMM form factor validated for the Supermicro X14SDW-72C-SP9F motherboard

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What does the 5600 MT/s rating mean when the kit is installed in the Supermicro X14SDW-72C-SP9F?

The board's memory controller will run both 128 GB modules at DDR5-5600, delivering PC5-44800 bandwidth per DIMM for a total of 256 GB at rated speed.

How does the DDR5 RDIMM interface and registered design affect usable capacity on this platform?

Registered buffering lets the memory controller drive both 4Rx4 modules at full 5600 MT/s without signal degradation, so the 256 GB kit is recognised at its full rated capacity.

What physical slot and clearance requirements must the chassis meet for these 288-pin modules?

Each 288-pin DDR5 RDIMM needs a standard DDR5 DIMM socket; the kit has no heat spreader, so low-profile CPU coolers or tight server rails will not interfere.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.