نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black square 50mm fan with 20mm depth and three-wire connector

OEM Industries

OEM Industries FAL3F12LHSA 50x20mm CPU cooler

SKU CH-RKN0-7GDKC

A 50 mm square fan with ball bearing and 3‑pin 12 V .27 A power for compact cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 50 mm square frame fits tight projector housings
  • Ball-bearing motor runs quietly for extended service life
  • 12 V 0.27 A draw keeps power demand low
  • Three-pin connector enables speed monitoring and control
  • Fan-only unit weighs little for vibration-sensitive mounts

Compact 50 mm square fan

The OEM Industries FAL3F12LHSA is a 50 by 20 mm DC fan built for tight spaces such as projectors or small-form-factor systems. It runs on 12 V and draws 0.27 A through a standard three-pin connector. Ball-bearing construction supports continuous operation in confined enclosures.

12 V 0.27 A three-pin power

The single specification that decides fit is the 12 V 0.27 A three-pin interface; the cooler will only work where that exact voltage, current and header are available. Systems using two-pin, four-pin or 5 V headers cannot power this unit without an adapter. Builders needing PWM control or a different voltage must select another model.

No LED or bundled accessories

The package contains the fan only, with no LED lighting, mounting brackets, screws or software. Installers must supply their own fixation hardware and any required adapters. The bare-fan approach keeps cost low but adds assembly steps for the end user.

أبرز المميزات

  • Compact 50 mm square frame fits tight projector housings
  • Ball-bearing motor runs quietly for extended service life
  • 12 V 0.27 A draw keeps power demand low
  • Three-pin connector enables speed monitoring and control
  • Fan-only unit weighs little for vibration-sensitive mounts

المواصفات

ModelFAL3F12LHSA
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

أسئلة حول هذا المنتج

What does the 0.27 A rating mean for a standard 12 V fan header?

At 12 V the fan draws 0.27 A, well within the typical 1 A limit of most motherboard headers.

What does the 3-pin connector provide compared with a 4-pin header?

The 3-pin plug supplies power and tachometer signal; speed is controlled by voltage rather than PWM.

Will the 50 mm by 20 mm frame fit my projector or small-form-factor build?

The square frame measures 50 mm on each side and is 20 mm thick, so verify your mounting holes and clearance against those dimensions.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.