نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 40mm square fan with 3-pin connector, no LED

OEM Industries

OEM Industries FD1240-A3033A 40mm 3-pin CPU cooler

SKU CH-373M-8GWHZ

Compact 40 mm ball-bearing fan with 3-pin 12 V 0.07 A power for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 40 mm frame fits tight builds
  • 12 V 0.07 A draw keeps power use low
  • Ball bearing gives long running life
  • Three-pin connector enables speed monitoring
  • Plain black design suits any system colour

Compact 40 mm CPU cooler

The OEM Industries FD1240-A3033A is a square 40 mm fan unit designed for tight chassis where a full tower cooler cannot fit. It targets builders upgrading small-form-factor systems or replacing a noisy stock blower on legacy hardware. The three-pin connector allows direct attachment to most motherboard headers without adapters.

Thermals noise and power

Ball-bearing construction keeps rotational friction low while the 12 V 0.07 A rating limits power draw to under one watt. At typical speeds the fan moves enough air for low-TDP processors yet stays quiet enough for office or home-theatre use. No LED lighting means no extra glare in darkened rooms.

Single specification that decides fit

The cooler is fan-only with no heatsink base or mounting hardware included. Buyers who need an integrated heatpipe tower or a threaded retention kit for a specific socket must look elsewhere. Verify that your board provides a three-pin header and that the 40 mm footprint clears surrounding components before ordering.

أبرز المميزات

  • Compact 40 mm frame fits tight builds
  • 12 V 0.07 A draw keeps power use low
  • Ball bearing gives long running life
  • Three-pin connector enables speed monitoring
  • Plain black design suits any system colour

المواصفات

ModelFD1240-A3033A
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

أسئلة حول هذا المنتج

How do I install the 40mm FD1240-A3033A cooler and what is the step people often miss?

Mount the 40mm fan using the four corner holes, connect the 3-pin header to the motherboard CPU_FAN port, and verify in BIOS that the fan spins at 12V 0.07A; the missed step is forgetting to set the header to PWM or DC mode so the 3-pin fan runs at full speed.

What maintenance or replacement will the FD1240-A3033A need over time?

The ball-bearing fan should be cleaned of dust every few months with compressed air; if noise or vibration appears, replace the entire 40mm unit since the bearing is not serviceable.

What limit appears first on the FD1240-A3033A during sustained use?

The 40mm frame and 0.07A current draw limit airflow, so thermal throttling of the CPU occurs before the fan reaches any mechanical limit.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.