نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two 70 mm two-tone fans with 4-pin connectors

OEM Industries

OEM Industries FD7010H12S 12V .35A 4-pin fan pair for XFX 8010

SKU CH-0E10-D007H

A pair of 12 V sleeve-bearing fans with four-pin connectors for the XFX 8010 cooler

  • Color2-Tone
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector4 Pin
  • LEDNo
  • Supplied as a matched pair for balanced airflow
  • 12 V .35 A rating keeps power draw low
  • Four-wire four-pin connector enables PWM speed control
  • Sleeve bearing runs quietly at typical desktop loads
  • Designed as a direct fit for the XFX 8010 heatsink

Replacement Fan Pair for XFX 8010

This two-piece set supplies matching FD7010H12S fans built for the XFX 8010 cooler. Each unit draws 12 V at .35 A through a standard 4-pin connector. The sleeve bearing keeps the assembly simple and cost-effective. Buyers needing PWM control for a different cooler should look elsewhere.

Four-Pin Power and Speed Limits

The 4-pin header allows the motherboard to regulate speed, but the sleeve bearing caps long-term high-RPM reliability. Continuous operation at maximum voltage may shorten lifespan compared with ball-bearing alternatives. No LED lighting or specialised control firmware is present. Systems requiring rated MTBF data for server duty will not find it here.

Straightforward Drop-In Installation

Alignment pins on the XFX 8010 shroud guide the frames into place, so no adapters or soldering are needed. The only common snag is routing the paired cables past tight VRM heatsinks without straining the connectors. Builders working in cramped ITX chassis should verify clearance before ordering.

أبرز المميزات

  • Supplied as a matched pair for balanced airflow
  • 12 V .35 A rating keeps power draw low
  • Four-wire four-pin connector enables PWM speed control
  • Sleeve bearing runs quietly at typical desktop loads
  • Designed as a direct fit for the XFX 8010 heatsink

المواصفات

ModelFD7010H12S
Color2-Tone
TypeFan only
Bearing TypeSleeve Bearing
Power Connector4 Pin
LEDNo

أسئلة حول هذا المنتج

Are these the FD7010H12S 4-pin fans intended for the XFX 8010 cooler?

Yes, the pair is sold specifically as FD7010H12S units with a 4-pin connector for the XFX 8010 heatsink.

What does the 12 V .35 A rating mean once the fans are installed?

Each fan draws 0.35 A at 12 V, so the motherboard header must supply at least that current per fan for full speed operation.

How does the 4-pin connector affect speed control on the XFX 8010?

The 4-pin PWM connection lets the motherboard vary fan speed precisely, rather than relying on voltage-only regulation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.