OEM Industries
OEM Industries pccooler F62 60mm 12V 0.13A 3500RPM 21CFM 22dBA CPU cooler
A 60 mm ball-bearing fan delivers 21 CFM at 3500 RPM while producing 22 dBA of noise on a 12 V 3-pin connector
- ColorBlack
- TypeFan only
- Fan Size60mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- 60 mm fan fits compact CPU air coolers
- 3500 RPM delivers 21 CFM airflow
- 22 dBA keeps noise low during operation
- Ball bearing design extends service life
- 12 V 0.13 A 3-pin power for simple connection
Compact 60 mm fan for tight builds
The pccooler F62 is a 60 mm DC fan designed for small-form-factor CPU coolers or auxiliary case ventilation. It runs on 12 V and draws 0.13 A, making it suitable for standard motherboard headers in space-constrained systems.
Ball-bearing design with three-pin power
A ball bearing supports the 3500 RPM rotor, delivering 21 CFM airflow at a quoted 22 dBA. The three-pin connector provides tachometer feedback so the board can monitor speed, while the black frame blends into most chassis interiors.
Replaces noisy or failed 60 mm coolers
This unit suits builders swapping out a worn stock fan on a low-profile heatsink or adding spot cooling to a cramped layout. It is not intended for high-TDP tower coolers or radiators that demand higher static pressure or larger blade area.
أبرز المميزات
- 60 mm fan fits compact CPU air coolers
- 3500 RPM delivers 21 CFM airflow
- 22 dBA keeps noise low during operation
- Ball bearing design extends service life
- 12 V 0.13 A 3-pin power for simple connection
المواصفات
| Model | pccooler F62 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 60mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
أسئلة حول هذا المنتج
Does the 3-pin connector limit the 3500 RPM fan to voltage control only?
Yes, the 3-pin power connector supports voltage-based speed regulation without PWM signalling.
Will the 60 mm frame with 6010 mounting holes fit my socket bracket?
The cooler uses a 60 mm square frame and standard 6010 hole spacing for compatible brackets.
How do I install the fan so the ball bearing runs at the rated 22 dBA?
Mount with the label side facing out, secure all four screws evenly, and avoid cable pressure on the blades.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



