暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OEM Industries

OEM Industries pccooler F62 60mm 12V 0.13A 3500RPM 21CFM 22dBA CPU cooler

SKU CH-GTCJ-CMZDP

A 60 mm ball-bearing fan delivers 21 CFM at 3500 RPM while producing 22 dBA of noise on a 12 V 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 60 mm fan fits compact CPU air coolers
  • 3500 RPM delivers 21 CFM airflow
  • 22 dBA keeps noise low during operation
  • Ball bearing design extends service life
  • 12 V 0.13 A 3-pin power for simple connection

Compact 60 mm fan for tight builds

The pccooler F62 is a 60 mm DC fan designed for small-form-factor CPU coolers or auxiliary case ventilation. It runs on 12 V and draws 0.13 A, making it suitable for standard motherboard headers in space-constrained systems.

Ball-bearing design with three-pin power

A ball bearing supports the 3500 RPM rotor, delivering 21 CFM airflow at a quoted 22 dBA. The three-pin connector provides tachometer feedback so the board can monitor speed, while the black frame blends into most chassis interiors.

Replaces noisy or failed 60 mm coolers

This unit suits builders swapping out a worn stock fan on a low-profile heatsink or adding spot cooling to a cramped layout. It is not intended for high-TDP tower coolers or radiators that demand higher static pressure or larger blade area.

特長

  • 60 mm fan fits compact CPU air coolers
  • 3500 RPM delivers 21 CFM airflow
  • 22 dBA keeps noise low during operation
  • Ball bearing design extends service life
  • 12 V 0.13 A 3-pin power for simple connection

仕様

Modelpccooler F62
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

この商品に関する質問

Does the 3-pin connector limit the 3500 RPM fan to voltage control only?

Yes, the 3-pin power connector supports voltage-based speed regulation without PWM signalling.

Will the 60 mm frame with 6010 mounting holes fit my socket bracket?

The cooler uses a 60 mm square frame and standard 6010 hole spacing for compatible brackets.

How do I install the fan so the ball bearing runs at the rated 22 dBA?

Mount with the label side facing out, secure all four screws evenly, and avoid cable pressure on the blades.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。