نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black frameless twin fan unit with four pin connector

OEM Industries

OEM Industries PLA08015S12HH 12V 0.35A 4-Pin CPU Cooler

SKU CH-2W1F-RSSNB

A frameless twin-fan cooler running at 12V 0.35A with a 4-pin connector for video-card cooling

  • ColorBlack
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector4 Pin
  • LEDNo
  • 12 V 0.35 A power draw keeps energy use low
  • 4-pin connector enables PWM speed control
  • sleeve bearing provides quiet operation at low cost
  • frameless twin-fan design fits tight video-card spaces
  • black finish matches most build aesthetics

Frameless twin-fan cooler

The OEM Industries PLA08015S12HH is a frameless twin-fan assembly designed for targeted airflow on graphics cards or similar components. It operates on a standard 12 V supply drawing 0.35 A and connects via a 4-pin PWM header for speed control. The unit uses sleeve bearings and includes no LED lighting. It suits builders adding spot cooling to a video card or similar device.

4-pin PWM and sleeve bearing limits

The 4-pin connector enables motherboard or controller-based speed regulation, but the sleeve bearing design favours horizontal mounting and moderate duty cycles. Continuous high-RPM operation may reduce bearing life compared to ball or fluid-dynamic alternatives. The 0.35 A current draw restricts maximum rotational speed and static pressure. No RGB or sensor headers beyond the standard PWM wire are present.

Cooling headroom for auxiliary use

The dual-frameless layout delivers focused airflow for memory modules, VRM zones or a single GPU, but total heat-moving capacity is bounded by the 0.35 A power budget. It handles light to moderate thermal loads comfortably; sustained heavy overclocks will exceed its practical limit. The three mounting holes simplify installation on compatible brackets, yet the cooler cannot replace a primary CPU tower or liquid loop.

أبرز المميزات

  • 12 V 0.35 A power draw keeps energy use low
  • 4-pin connector enables PWM speed control
  • sleeve bearing provides quiet operation at low cost
  • frameless twin-fan design fits tight video-card spaces
  • black finish matches most build aesthetics

المواصفات

ModelPLA08015S12HH
ColorBlack
TypeFan only
Bearing TypeSleeve Bearing
Power Connector4 Pin
LEDNo

أسئلة حول هذا المنتج

Is this PLA08015S12HH the right choice if I need a 12 V 0.35 A frameless fan with a 4-pin connector?

Yes, the model is a Twins frameless cooling fan rated at 12 V 0.35 A and uses a 4-pin power connector, matching those exact specifications.

What does the 0.35 A rating mean for everyday cooling performance?

At 12 V the fan draws 0.35 A, so it delivers modest airflow suitable for low-heat video-card or auxiliary cooling rather than high-TDP CPU loads.

How does the 4-pin PWM interface control the fan in practice?

The 4-pin connector carries a PWM signal that lets the motherboard or controller vary speed precisely, while the fourth wire reports real-time RPM back to the system.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.