暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black frameless twin fan unit with four pin connector

OEM Industries

OEM Industries PLA08015S12HH 12V 0.35A 4-Pin CPU Cooler

SKU CH-2W1F-RSSNB

A frameless twin-fan cooler running at 12V 0.35A with a 4-pin connector for video-card cooling

  • ColorBlack
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector4 Pin
  • LEDNo
  • 12 V 0.35 A power draw keeps energy use low
  • 4-pin connector enables PWM speed control
  • sleeve bearing provides quiet operation at low cost
  • frameless twin-fan design fits tight video-card spaces
  • black finish matches most build aesthetics

Frameless twin-fan cooler

The OEM Industries PLA08015S12HH is a frameless twin-fan assembly designed for targeted airflow on graphics cards or similar components. It operates on a standard 12 V supply drawing 0.35 A and connects via a 4-pin PWM header for speed control. The unit uses sleeve bearings and includes no LED lighting. It suits builders adding spot cooling to a video card or similar device.

4-pin PWM and sleeve bearing limits

The 4-pin connector enables motherboard or controller-based speed regulation, but the sleeve bearing design favours horizontal mounting and moderate duty cycles. Continuous high-RPM operation may reduce bearing life compared to ball or fluid-dynamic alternatives. The 0.35 A current draw restricts maximum rotational speed and static pressure. No RGB or sensor headers beyond the standard PWM wire are present.

Cooling headroom for auxiliary use

The dual-frameless layout delivers focused airflow for memory modules, VRM zones or a single GPU, but total heat-moving capacity is bounded by the 0.35 A power budget. It handles light to moderate thermal loads comfortably; sustained heavy overclocks will exceed its practical limit. The three mounting holes simplify installation on compatible brackets, yet the cooler cannot replace a primary CPU tower or liquid loop.

特長

  • 12 V 0.35 A power draw keeps energy use low
  • 4-pin connector enables PWM speed control
  • sleeve bearing provides quiet operation at low cost
  • frameless twin-fan design fits tight video-card spaces
  • black finish matches most build aesthetics

仕様

ModelPLA08015S12HH
ColorBlack
TypeFan only
Bearing TypeSleeve Bearing
Power Connector4 Pin
LEDNo

この商品に関する質問

Is this PLA08015S12HH the right choice if I need a 12 V 0.35 A frameless fan with a 4-pin connector?

Yes, the model is a Twins frameless cooling fan rated at 12 V 0.35 A and uses a 4-pin power connector, matching those exact specifications.

What does the 0.35 A rating mean for everyday cooling performance?

At 12 V the fan draws 0.35 A, so it delivers modest airflow suitable for low-heat video-card or auxiliary cooling rather than high-TDP CPU loads.

How does the 4-pin PWM interface control the fan in practice?

The 4-pin connector carries a PWM signal that lets the motherboard or controller vary speed precisely, while the fourth wire reports real-time RPM back to the system.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。