نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 92mm square DC fan with ball bearing and three-wire connector

OEM Industries

OEM Industries V92E12BMA7-52 T07 92mm CPU cooler

SKU CH-3F5E-AWWDR

A 92 mm ball-bearing fan rated at 12 V and 0.62 A with a three-wire connector

  • ColorBlack
  • TypeFan only
  • Fan Size92mm
  • Bearing TypeBall
  • LEDNo
  • 92 mm square frame fits tight spaces
  • Nidec 9238 motor built for continuous operation
  • Ball bearing reduces friction for longer life
  • 12 V 0.62 A draws modest power from header
  • Three-wire connector reports speed to motherboard

92 mm Nidec DC Fan

This 92 mm square DC fan from Nidec carries model V92E12BMA7-52 T07 and runs on 12 V at 0.62 A. It uses a three-wire, three-pin connection and a ball bearing. The frame is black and has no LED lighting. The unit is supplied new and is sold as a fan only.

Best for 92 mm mounts needing a 12 V three-pin fan

Builders replacing a 92 mm cooler fan with a matching voltage and connector will find this unit suitable. It is not intended for systems that require PWM control, larger fan diameters, or integrated heatsink assemblies. Buyers needing RGB illumination or a different pin layout should look elsewhere.

Fits standard 92 mm square mounting holes

The fan installs directly into any 92 mm square mounting pattern using the three-pin header for power and speed reporting. No additional brackets or adapters are included. Its low 0.62 A draw leaves ample headroom on typical fan headers. Ensure the case or heatsink provides the correct 92 mm spacing before ordering.

أبرز المميزات

  • 92 mm square frame fits tight spaces
  • Nidec 9238 motor built for continuous operation
  • Ball bearing reduces friction for longer life
  • 12 V 0.62 A draws modest power from header
  • Three-wire connector reports speed to motherboard

المواصفات

ModelV92E12BMA7-52
ColorBlack
TypeFan only
Fan Size92mm
Bearing TypeBall
LEDNo

أسئلة حول هذا المنتج

What motherboard header does the 3-pin connector on this V92E12BMA7-52 T07 cooler plug into?

The 3-wire 3-pin connector fits a standard 12 V fan header on the motherboard; the board must supply 12 V at up to 0.62 A for the NIDEC 9238 motor to run.

Will this 92 mm ball-bearing fan clear a low-profile heatsink on an older socket board?

The fan frame is a 92 mm square DC cooler, so it mounts on 92 mm hole patterns; verify the heatsink’s fan-clip spacing and height allowance before fitting.

How can I confirm the V92E12BMA7-52 is spinning at the correct speed after installation?

Connect the 3-pin header, power on, and read the RPM reported in BIOS or a monitoring utility; a steady reading shows the ball-bearing NIDEC 9238 motor is operating.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.