EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
128 GB DDR4-2400 ECC load-reduced DIMM for Fujitsu-compatible servers and workstations
This 128GB DDR4 2400 CL17 module is built for servers, workstations and NAS systems that require ECC load-reduced memory. It operates at 1.2V using a 288-pin form factor with an 8Rx4 rank configuration. The module is designed for environments where data integrity and high capacity per slot are essential.
The module installs in 288-pin DDR4 slots that support load-reduced ECC DIMMs. It cannot be mixed with unbuffered or standard registered ECC memory. Backward compatibility with 2133MHz systems allows deployment in older platforms without configuration changes. No heat spreader is fitted, so airflow across the DIMM rows must be adequate.
This unit replaces Fujitsu part numbers ending in L517, L617, E617 and E517. The jump is worthwhile when a server needs the maximum 128GB per DIMM to reduce slot count or when existing modules have failed. It is not for desktop PCs, consumer laptops or any system that does not explicitly support DDR4 ECC load-reduced memory.
| Brand | OWC |
|---|---|
| Part Number | 2L4D48R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 8Rx4 |
| Heat Spreader | No |
The module has no heat spreader and runs at 1.2V, so sustained throughput is limited by the platform's airflow and DIMM-slot cooling rather than an on-module throttle.
At 1.2V the module draws roughly 10–12 watts; it adds no moving parts, so any extra noise comes only from chassis fans reacting to the added heat load.
The board needs DDR4 slots wired for load-reduced ECC, a memory controller that accepts 8Rx4 ranks, and BIOS/firmware that enables PC4-19200 (or 2133 MHz fallback) operation.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟