OWC 16GB (2x8GB) DDR3L 1600 CL11 1Rx4 240-pin 1.35V ECC Registered RDIMM Kit
- 16GB (2 x 8GB)
- 240-Pin DDR3L ECC R…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
16 GB DDR3L 1600 ECC registered RDIMM kit for Supermicro A+ Server 2122 series
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB DDR3L 1600 registered DIMMs built for Supermicro A+ Server 2122TC and 2122TG systems. The modules run at 1.35 V with CL11 latency and provide error-correcting code protection for data integrity. They are designed for workstation, server, NAS and router platforms that require registered memory.
Each stick uses the 240-pin DDR3L RDIMM form factor and must be installed in a system that supports registered ECC memory. The kit cannot be mixed with unbuffered modules and will not work in standard desktop motherboards. Compatibility is limited to the listed Supermicro A+ Server series.
The dual-rank 1Rx4 organisation delivers 16 GB of ECC-protected capacity, suitable for extending the life of existing infrastructure or building cost-effective new servers. Systems needing more than 16 GB or requiring higher speeds than DDR3L 1600 will need a different memory configuration.
| Brand | OWC |
|---|---|
| Part Number | 1R6T31R4016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro A+ Server 2122TC Series Supermicro A+ Server 2122TG Series |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The single-rank x4 organisation keeps electrical loading low, so the memory controller can maintain the rated 1600 MT/s without down-clocking during long workloads.
Each module draws only 1.35 V with no heat spreader, so steady-state power stays at the JEDEC DDR3L level and fan noise does not increase beyond the server’s normal curve.
The kit is validated for the A+ Server 2122TC and 2122TG series; the system must be one of those models with a BIOS that supports registered ECC DDR3L RDIMMs.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟