暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OWC

OWC 16GB (2x8GB) DDR3L 1600 ECC Registered RDIMM Supermicro 2122

SKU CH-YVYR-HMDQ0

16 GB DDR3L 1600 ECC registered RDIMM kit for Supermicro A+ Server 2122 series

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • 16 GB dual-channel kit (2 × 8 GB) expands memory capacity
  • DDR3L 1600 CL11 at 1.35 V reduces power draw
  • 240-pin RDIMM fits Supermicro A+ Server 2122TC and 2122TG
  • Replaces Supermicro MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16, MEMDR380LSV04ER16

Server-grade DDR3L ECC RDIMM kit

This 16 GB kit contains two 8 GB DDR3L 1600 registered DIMMs built for Supermicro A+ Server 2122TC and 2122TG systems. The modules run at 1.35 V with CL11 latency and provide error-correcting code protection for data integrity. They are designed for workstation, server, NAS and router platforms that require registered memory.

Registered 240-pin form factor fits qualified slots

Each stick uses the 240-pin DDR3L RDIMM form factor and must be installed in a system that supports registered ECC memory. The kit cannot be mixed with unbuffered modules and will not work in standard desktop motherboards. Compatibility is limited to the listed Supermicro A+ Server series.

16 GB total capacity for moderate workloads

The dual-rank 1Rx4 organisation delivers 16 GB of ECC-protected capacity, suitable for extending the life of existing infrastructure or building cost-effective new servers. Systems needing more than 16 GB or requiring higher speeds than DDR3L 1600 will need a different memory configuration.

特長

  • ECC registered design protects data integrity in servers
  • 16 GB dual-channel kit (2 × 8 GB) expands memory capacity
  • DDR3L 1600 CL11 at 1.35 V reduces power draw
  • 240-pin RDIMM fits Supermicro A+ Server 2122TC and 2122TG
  • Replaces Supermicro MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16, MEMDR380LSV04ER16

仕様

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro A+ Server 2122TC Series
Supermicro A+ Server 2122TG Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How does the 1Rx4 rank configuration limit sustained throughput on the Supermicro 2122?

The single-rank x4 organisation keeps electrical loading low, so the memory controller can maintain the rated 1600 MT/s without down-clocking during long workloads.

What thermal or power change appears when both 8 GB modules run continuously at 1.35 V?

Each module draws only 1.35 V with no heat spreader, so steady-state power stays at the JEDEC DDR3L level and fan noise does not increase beyond the server’s normal curve.

Which Supermicro chassis and BIOS revision must already be present for this kit to POST?

The kit is validated for the A+ Server 2122TC and 2122TG series; the system must be one of those models with a BIOS that supports registered ECC DDR3L RDIMMs.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。