نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with gold edge connectors and black memory chips

OWC

OWC 1R6T31R408GB 8GB DDR3L 1600 ECC RDIMM 1.35V Supermicro A+ Server

SKU CH-8EWW-TP2C5

8GB DDR3L 1600 ECC registered DIMM for Supermicro A+ Server series 1012, 1042, 1122 and 2022

  • Capacity8GB
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 8GB

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 speed with CL11 latency boosts throughput
  • Low 1.35V voltage reduces power draw and heat
  • Single 8GB 1Rx4 module simplifies capacity upgrades
  • Validated for Supermicro A+ Server 1012, 1042, 1122, 2022 series

Server-Specific 8GB DDR3L ECC RDIMM

This module is an 8GB DDR3L 1600 registered DIMM built for Supermicro A+ Server series including 1012C, 1012G, 1042G, 1122GG and 2022G. It operates at 1.35V with CL11 latency and provides error-correcting code protection for data integrity. The 240-pin form factor fits only compatible server and workstation boards.

Sustained Load Behaviour

Registered buffering reduces electrical load on the memory controller, allowing stable operation across all populated slots during continuous workloads. ECC circuitry detects and corrects single-bit errors in real time without halting the system. The 1.35V DDR3L voltage lowers power draw and heat output compared to standard DDR3 during extended runs.

DDR3L Interface Limits

The DDR3L 1600 standard caps transfer rates at PC3L-12800, so bandwidth cannot exceed this ceiling regardless of CPU capability. Mixing registered modules with unbuffered memory is not supported and will prevent boot. Systems requiring higher frequencies or greater densities must move to a newer memory generation. Buyers needing unbuffered ECC or desktop-compatible RAM cannot use this module.

أبرز المميزات

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 speed with CL11 latency boosts throughput
  • Low 1.35V voltage reduces power draw and heat
  • Single 8GB 1Rx4 module simplifies capacity upgrades
  • Validated for Supermicro A+ Server 1012, 1042, 1122, 2022 series

المواصفات

BrandOWC
Part Number1R6T31R408GB
Capacity8GB
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro A+ Server 1012C Series
Supermicro A+ Server 1012G Series
Supermicro A+ Server 1042G Series
Supermicro A+ Server 1122GG Series
Supermicro A+ Server 2022G Series

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does the 1.35V DDR3L module run cooler than standard DDR3 in a Supermicro A+ server?

The 1.35V DDR3L voltage reduces power draw and heat compared with 1.5V DDR3, helping the 1Rx4 registered DIMM stay cooler during continuous server workloads.

Must the Supermicro A+ motherboard have 240-pin DDR3L slots that support ECC registered memory?

Yes, the module requires a 240-pin DDR3L slot that accepts ECC registered RDIMMs; it will not work in unbuffered or non-ECC slots.

Can I add this 8GB 1Rx4 RDIMM alongside existing 2Rx4 modules in a Supermicro 1012G system?

Mixing 1Rx4 and 2Rx4 registered DIMMs is usually supported, but the Supermicro 1012G memory population rules should be checked for rank limits per channel.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.