OWC 1R6T31R408GB 8GB DDR3L 1600 ECC RDIMM 1.35V Supermicro A+ Server
- 8GB
- 240-Pin DDR3L ECC R…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
A 16 GB DDR3L ECC registered DIMM kit for Supermicro A+ Server 1012C, 1012G, 1042G, 1122GG and 2022G systems
Capacity 16GB (2 x 8GB)
This OWC kit provides 16 GB of DDR3L registered ECC memory in two 8 GB modules. It is built for Supermicro A+ Server series including 1012C, 1012G, 1042G, 1122GG and 2022G systems. The modules run at 1600 MHz with CL11 latency at 1.35 V.
It suits administrators who need to expand capacity in the listed Supermicro platforms with registered ECC DIMMs. It is not for standard desktop computers, laptops or any system that requires unbuffered non-ECC memory or a different DDR generation.
The 240-pin RDIMMs use 1Rx4 registered ECC organisation, which the target Supermicro platforms require for correct operation. Mixing these modules with unbuffered memory will prevent the system from posting.
| Brand | OWC |
|---|---|
| Part Number | 1R6T31R4016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro A+ Server 1012C Series Supermicro A+ Server 1012G Series Supermicro A+ Server 1042G Series Supermicro A+ Server 1122GG Series Supermicro A+ Server 2022G Series |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the 240-pin form factor matches the DDR3L slots on the 1012C, 1012G, 1042G, 1122GG and 2022G series listed for this kit.
Populate the lowest-numbered channel slots first — typically CPU1 DIMM slots A1 and B1 — so the registered ECC modules initialise in the sequence the firmware expects.
Run a full memory diagnostic at each scheduled maintenance window; replace any module that logs correctable ECC errors or fails the test to avoid uncorrectable failures later.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟