暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 16GB (2x8GB) DDR3L 1600 CL11 1Rx4 240-pin 1.35V ECC RDIMM Kit

SKU CH-SZDH-2E6GW

A 16 GB DDR3L ECC registered DIMM kit for Supermicro A+ Server 1012C, 1012G, 1042G, 1122GG and 2022G systems

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in server workloads
  • DDR3L 1600 CL11 speed delivers responsive performance for compatible systems
  • Low 1.35V voltage reduces power draw and heat output
  • 16GB kit with two 8GB modules enables dual-channel configuration
  • Validated for Supermicro A+ Server 1012, 1042, 1122 and 2022 series

Server ECC RDIMM Kit

This OWC kit provides 16 GB of DDR3L registered ECC memory in two 8 GB modules. It is built for Supermicro A+ Server series including 1012C, 1012G, 1042G, 1122GG and 2022G systems. The modules run at 1600 MHz with CL11 latency at 1.35 V.

Workstation and server upgrades only

It suits administrators who need to expand capacity in the listed Supermicro platforms with registered ECC DIMMs. It is not for standard desktop computers, laptops or any system that requires unbuffered non-ECC memory or a different DDR generation.

Registered ECC with 1Rx4 organisation

The 240-pin RDIMMs use 1Rx4 registered ECC organisation, which the target Supermicro platforms require for correct operation. Mixing these modules with unbuffered memory will prevent the system from posting.

特長

  • ECC registered design protects data integrity in server workloads
  • DDR3L 1600 CL11 speed delivers responsive performance for compatible systems
  • Low 1.35V voltage reduces power draw and heat output
  • 16GB kit with two 8GB modules enables dual-channel configuration
  • Validated for Supermicro A+ Server 1012, 1042, 1122 and 2022 series

仕様

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro A+ Server 1012C Series
Supermicro A+ Server 1012G Series
Supermicro A+ Server 1042G Series
Supermicro A+ Server 1122GG Series
Supermicro A+ Server 2022G Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 240-pin DDR3L RDIMMs fit the DIMM slots on a Supermicro A+ Server 1012C?

Yes, the 240-pin form factor matches the DDR3L slots on the 1012C, 1012G, 1042G, 1122GG and 2022G series listed for this kit.

What is the correct order for installing the two 8 GB modules in a Supermicro A+ Server?

Populate the lowest-numbered channel slots first — typically CPU1 DIMM slots A1 and B1 — so the registered ECC modules initialise in the sequence the firmware expects.

When should the 1.35 V ECC RDIMMs be replaced in a 24/7 server?

Run a full memory diagnostic at each scheduled maintenance window; replace any module that logs correctable ECC errors or fails the test to avoid uncorrectable failures later.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。