暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3L memory module with gold edge connectors and black chips, no heat spreader

OWC

OWC 8GB DDR3L 1600 CL11 240-pin ECC Registered RDIMM 1.35V 1Rx4 Supermicro A+ Server

SKU CH-JWSB-NNEDJ

An 8 GB DDR3L 1600 ECC registered RDIMM for Supermicro A+ Server 2022 and 4042 series

  • Capacity8GB
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 8GB

  • ECC registered design protects data integrity in servers
  • 8 GB DDR3L 1600 CL11 module adds capacity to compatible systems
  • Low 1.35 V DDR3L voltage reduces power draw versus standard DDR3
  • Qualified for Supermicro A+ Server 2022TC 2022TG 4022G 4042G series
  • Replaces Supermicro MEMDR380LHL07ER16 MEMDR380LSL10ER16 MEMDR380LSL14ER16 MEMDR380LSV04ER16

Server ECC Upgrade

This 8GB DDR3L registered DIMM is built for Supermicro A+ Server series 2022TC, 2022TG, 4022G and 4042G. It delivers ECC error correction and registered signalling for stable operation in workstations, servers, NAS systems and routers. The module runs at 1600MHz with CL11 latency and 1.35V. It will not work in standard desktop computers and cannot be mixed with unbuffered memory.

Single Module Simplicity

The upgrade consists of one 8GB stick, so you add capacity in exact 8GB increments without populating extra slots. No heat spreader is fitted, keeping the profile low for dense server chassis. OWC tests every module in-house and backs it with a limited lifetime warranty and free technical support. It replaces Supermicro part numbers MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16 and MEMDR380LSV04ER16.

DDR3L Platform Limits

The DDR3L interface tops out at 1600MHz and 1.35V, so bandwidth and capacity per module are capped by the memory controller of the supported Supermicro platforms. Registered signalling adds a clock cycle of latency compared with unbuffered DIMMs, which is normal for server workloads but makes this memory unsuitable for any system that requires unbuffered modules. Buyers needing higher speeds, lower voltage or unbuffered operation must choose a different platform.

特長

  • ECC registered design protects data integrity in servers
  • 8 GB DDR3L 1600 CL11 module adds capacity to compatible systems
  • Low 1.35 V DDR3L voltage reduces power draw versus standard DDR3
  • Qualified for Supermicro A+ Server 2022TC 2022TG 4022G 4042G series
  • Replaces Supermicro MEMDR380LHL07ER16 MEMDR380LSL10ER16 MEMDR380LSL14ER16 MEMDR380LSV04ER16

仕様

BrandOWC
Part Number1R6T31R408GB
Capacity8GB
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro A+ Server 2022TC Series
Supermicro A+ Server 2022TG Series
Supermicro A+ Server 4022G Series
Supermicro A+ Server 4042G Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 1Rx4 ECC registered module need any firmware updates or paired replacements later?

The module is a single 8 GB 1Rx4 registered DIMM; it operates independently and does not require firmware updates or matched-pair replacement.

What thermal limit appears first when the DIMM runs continuously at 1600 MHz in a Supermicro A+ Server?

The DDR3L 1.35 V specification is the primary constraint; sustained loads stay within JEDEC thermal limits without additional cooling.

How much power does the 1.35 V RDIMM draw and does it add audible noise in a 240-pin server slot?

At 1.35 V the module draws less power than standard 1.5 V DDR3 and has no moving parts, so it adds no audible noise.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。