OWC 1R6T31R408GB 8GB DDR3L 1600 ECC RDIMM 1.35V Supermicro A+ Server
- 8GB
- 240-Pin DDR3L ECC R…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
An 8 GB DDR3L 1600 ECC registered RDIMM for Supermicro A+ Server 2022 and 4042 series
Capacity 8GB
This 8GB DDR3L registered DIMM is built for Supermicro A+ Server series 2022TC, 2022TG, 4022G and 4042G. It delivers ECC error correction and registered signalling for stable operation in workstations, servers, NAS systems and routers. The module runs at 1600MHz with CL11 latency and 1.35V. It will not work in standard desktop computers and cannot be mixed with unbuffered memory.
The upgrade consists of one 8GB stick, so you add capacity in exact 8GB increments without populating extra slots. No heat spreader is fitted, keeping the profile low for dense server chassis. OWC tests every module in-house and backs it with a limited lifetime warranty and free technical support. It replaces Supermicro part numbers MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16 and MEMDR380LSV04ER16.
The DDR3L interface tops out at 1600MHz and 1.35V, so bandwidth and capacity per module are capped by the memory controller of the supported Supermicro platforms. Registered signalling adds a clock cycle of latency compared with unbuffered DIMMs, which is normal for server workloads but makes this memory unsuitable for any system that requires unbuffered modules. Buyers needing higher speeds, lower voltage or unbuffered operation must choose a different platform.
| Brand | OWC |
|---|---|
| Part Number | 1R6T31R408GB |
| Capacity | 8GB |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro A+ Server 2022TC Series Supermicro A+ Server 2022TG Series Supermicro A+ Server 4022G Series Supermicro A+ Server 4042G Series |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The module is a single 8 GB 1Rx4 registered DIMM; it operates independently and does not require firmware updates or matched-pair replacement.
The DDR3L 1.35 V specification is the primary constraint; sustained loads stay within JEDEC thermal limits without additional cooling.
At 1.35 V the module draws less power than standard 1.5 V DDR3 and has no moving parts, so it adds no audible noise.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?