暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OWC

OWC 16GB DDR3L 1600 ECC Registered RDIMM 2Rx4 1.35V 240-pin 1R6T32R416GB

SKU CH-MZ1Z-VZDTQ

16 GB DDR3L 1600 ECC registered RDIMM for Supermicro A+ Server 2022TC, 2022TG, 4022G and 4042G series

  • Capacity16GB
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 16 GB capacity expands memory headroom for virtualisation
  • DDR3L 1600 CL11 speed matches platform specifications
  • 35 V operation reduces power draw in 24/7 environments

Server ECC RDIMM Upgrade

This 16GB DDR3L 1600 ECC Registered RDIMM is built for Supermicro A+ Server series 2022TC 2022TG 4022G and 4042G. It targets administrators who need registered error-correcting memory for workloads that demand data integrity. The module runs at 1.35V with CL11 latency and a 2Rx4 organisation. It will not work in standard desktop computers or alongside unbuffered DIMMs.

Simple DIMM Installation

Installation follows the usual 240-pin DDR3 DIMM procedure: power down the server, open the chassis, align the keyed notch and press firmly until the retention clips lock. No heat spreader is fitted, so clearance is minimal. The most common issue is mixing registered and unbuffered modules, which prevents the system from posting. Verify that every slot uses registered ECC RDIMMs before powering on.

Confirm Server Model First

Check that your chassis is one of the listed Supermicro A+ Server models before ordering. The motherboard must support DDR3L 1600 registered ECC memory and accept 2Rx4 modules at 1.35V. Do not assume compatibility with other Supermicro lines or with workstations that require unbuffered memory. If the system manual specifies a different rank or voltage, this module will not be suitable.

特長

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 16 GB capacity expands memory headroom for virtualisation
  • DDR3L 1600 CL11 speed matches platform specifications
  • 35 V operation reduces power draw in 24/7 environments

仕様

BrandOWC
Part Number1R6T32R416GB
Capacity16GB
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro A+ Server 2022TC Series
Supermicro A+ Server 2022TG Series
Supermicro A+ Server 4022G Series
Supermicro A+ Server 4042G Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How can I confirm the module is running at DDR3L 1600 with CL11 after installation?

The server BIOS or a memory-test utility will show the detected speed as 1600 and the CAS latency as CL11 for this DDR3L ECC RDIMM.

What comes in the box and is anything else required to add this 16 GB DDR3L ECC RDIMM to a Supermicro A+ Server 2022TC?

The package contains one 16 GB 240-pin DDR3L ECC Registered DIMM; no extra parts are needed for a compatible Supermicro A+ Server 2022TC, 2022TG, 4022G or 4042G.

Which OWC DDR3L ECC RDIMM part number should I choose for a single 16 GB upgrade in a Supermicro A+ Server 4022G?

Select part number 1R6T32R416GB; it provides one 16 GB 2Rx4 DDR3L 1600 CL11 1.35 V Registered module that matches the 4022G specifications.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。