OWC 32GB DDR3L 1066 PC3L-8500 CL7 4Rx4 240-pin 1.35V ECC Registered DIMM server RAM
- 32GB
- 240-Pin DDR3L ECC R…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
A 32 GB dual-channel DDR3-1600 ECC registered RDIMM kit for servers and workstations
Capacity 32GB (2 x 16GB)
This OWC kit provides 32GB of DDR3 memory across two 16GB registered DIMMs. Each module uses a 240-pin form factor with 2Rx4 organisation and ECC error correction. The memory is designed for workstations, servers and compatible NAS or router platforms that require registered DDR3 modules.
Rated at 1600 MT/s with CL11 latency and 1.5V operation, the modules meet JEDEC PC3-12800 specifications for consistent throughput. Registered buffering reduces electrical load on the memory controller, helping stability during extended multi-threaded workloads in virtualisation or database environments.
The kit replaces or augments existing registered ECC DDR3 memory in systems that support 240-pin RDIMMs. It will not work in platforms that require unbuffered or non-ECC modules, nor in boards limited to earlier DDR generations. Buyers needing higher capacities per slot or different voltage ranges should verify platform documentation before purchasing.
| Brand | OWC |
|---|---|
| Part Number | 1R6D32R4032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Each module runs at the standard 1.5 volts specified by JEDEC for DDR3 1600, so power draw is determined by the platform's memory controller rather than the kit itself.
The board must provide 240-pin DDR3 slots that support ECC and registered DIMMs; standard desktop chipsets without registered-buffer support will not work.
No, registered and unbuffered DDR3 cannot be mixed; the memory controller will reject the combination and the system will not boot.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟