OWC 16GB DDR3L 1600 PC3L-12800 CL11 2Rx4 240-pin 1.35V ECC RDIMM server RAM
- 16GB
- 240-Pin DDR3L ECC R…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
16 GB dual-channel DDR3L 1600 CL11 ECC registered RDIMM kit for servers and workstations
Capacity 16GB (2 x 8GB)
This OWC kit supplies 16 GB of DDR3L 1600 memory in a matched pair of 8 GB registered DIMMs. ECC and register buffering protect data integrity in multi-socket workstations, servers and compatible NAS or router platforms. The modules run at 1.35 V and conform to JEDEC PC3L-12800 CL11 timings. They are not compatible with standard desktop motherboards or unbuffered memory.
Each DIMM operates at the DDR3L nominal voltage of 1.35 V, reducing power draw compared with 1.5 V DDR3 equivalents. The registered design places less electrical load on the memory controller, helping sustained throughput under continuous server workloads. No heat spreaders are fitted, so airflow across the 240-pin modules is determined by the host chassis. Acoustic impact is negligible because the memory itself has no moving parts.
The kit upgrades systems currently running lower-capacity or slower-speed registered ECC DDR3 modules. Moving to 1600 MHz CL11 increases memory bandwidth for virtualization, database or file-serving tasks. The jump is worthwhile when the platform supports DDR3L 1600 registered DIMMs and the workload is limited by memory capacity or latency. It does not suit boards that require unbuffered or non-ECC memory.
| Brand | OWC |
|---|---|
| Part Number | 1R6T31R4016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC registered mode is active — skipping the BIOS check is the common oversight.
No routine maintenance is required; the modules have no heat spreaders or moving parts, so replacement only occurs if a DIMM fails or capacity must be increased beyond 16GB.
The DDR3L 1600 CL11 timing and 1.35V voltage ceiling define the maximum stable throughput; sustained workloads will hit this bandwidth and latency boundary before any thermal limit.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟