نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green printed circuit board with black memory chips, gold edge connector, no heat spreader

OWC

OWC 32GB DDR4 3200 CL22 1.2V 288-pin UDIMM for Dell OptiPlex 3000/5000/5080

SKU CH-HCEA-FXW9D

32 GB DDR4 3200 CL22 UDIMM for Dell OptiPlex 3000, 5000 and 5080 desktops

  • Capacity32GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCNo
  • 32 GB capacity enables heavy multitasking and large-file workflows
  • DDR4 3200 speed with CL22 latency delivers responsive desktop performance
  • 2 V operation reduces power draw and heat in compact chassis
  • Validated for OptiPlex 3000, 5000 and 5080 SFF and Tower models
  • Backward compatible with 2133, 2400, 2666 and 2933 MHz systems

OWC 32GB DDR4 UDIMM for Dell OptiPlex

This OWC 32GB DDR4 3200 CL22 module is built for Dell OptiPlex 3000, 5000 and 5080 systems in both small form factor and tower chassis. It targets owners of those specific workstations who need a straightforward capacity increase without compatibility guesswork.

Fits 288-pin DDR4 slots in the listed OptiPlex

The unbuffered non-ECC DIMM runs at 1.2V and slots directly into the motherboard memory sockets of the compatible OptiPlex 3000 SFF, 3000 Tower, 5000 SFF, 5000 Tower and 5080 SFF. It requires no extra cooling, no firmware updates and no additional hardware to operate at its rated PC4-25600 speed.

Replaces or adds to slower DDR4 modules

The module is backward compatible with 2133, 2400, 2666 and 2933MHz DDR4, so it can upgrade existing sticks running at those speeds. The jump is worthwhile when the system currently has less than 32GB total or when installed memory runs below 3200MHz and the board supports the higher rate. It is not for systems that require ECC, registered memory or a different DDR generation.

أبرز المميزات

  • 32 GB capacity enables heavy multitasking and large-file workflows
  • DDR4 3200 speed with CL22 latency delivers responsive desktop performance
  • 2 V operation reduces power draw and heat in compact chassis
  • Validated for OptiPlex 3000, 5000 and 5080 SFF and Tower models
  • Backward compatible with 2133, 2400, 2666 and 2933 MHz systems

المواصفات

BrandOWC
Part Number3U2D42R832GB
Capacity32GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 3000 SFF
Dell OptiPlex 3000 Tower
Dell OptiPlex 5000 SFF
Dell OptiPlex 5000 Tower
Dell OptiPlex 5080 SFF

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will the CL22 latency limit throughput on my Dell OptiPlex 5000 Tower during long rendering jobs?

CL22 is the rated CAS latency at 3200 MT/s; the module runs at standard JEDEC timings so sustained throughput is determined by the platform memory controller, not by the stick itself.

How much heat does the 1.2 V 32 GB module generate when the OptiPlex 3000 SFF runs all day?

At 1.2 V with no heat spreader the DRAM stays within normal DDR4 thermal limits; the OptiPlex chassis airflow handles the modest heat load without extra cooling.

My OptiPlex 5080 SFF has two DIMM slots — do I need a matched pair for this 2Rx8 stick to work?

The module is unbuffered non-ECC 2Rx8 and works as a single 32 GB DIMM; no matched pair is required for the listed OptiPlex models.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.