OWC 2L9D48R4256P 256GB (2x128GB) DDR4 2933 ECC LRDIMM memory upgrade
- 256GB (2 x 128GB)
- 288-Pin DDR4 ECC LR…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
512 GB DDR4 2933 ECC load-reduced kit in four 128 GB modules for Supermicro X11SPD-F servers
Capacity 512GB (4 x 128GB)
This 512GB kit contains four 128GB DDR4 2933 ECC Load Reduced DIMMs built for the Supermicro X11SPD-F motherboard. Modules run at PC4-23400 with CL21 latency and 1.2V operation. The 8Rx4 organisation and 288-pin form factor are specific to server and workstation platforms.
The kit replaces smaller LRDIMM sets when the workload demands more than 512GB total capacity across four slots. A jump is worth it when current memory limits virtual-machine density, database caching or large-dataset processing on the X11SPD-F platform. Backward compatibility with 2133MHz, 2400MHz and 2666MHz buses allows phased upgrades without replacing the CPU.
This memory suits administrators expanding a Supermicro X11SPD-F server or workstation that already uses LRDIMM slots. It will not fit systems requiring unbuffered or standard registered ECC DIMMs. Builders needing different capacities, speeds or form factors should look at other modules.
| Brand | OWC |
|---|---|
| Part Number | 2L9D48R4512S |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 8Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11SPD-F |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the kit is validated for the Supermicro X11SPD-F and uses the standard 288-pin DDR4 LRDIMM form factor required by that board.
Align the notch with the slot key, press straight down until both retention clips click, and populate all four channels identically to enable quad-channel operation.
Replace modules only if ECC correctable-error counts rise sharply or the system logs uncorrectable memory errors; otherwise they run for the server's service life.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟