نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Four green DDR4 UDIMM sticks with gold contacts and black chips

OWC

OWC 64GB (4x16GB) DDR4 2666MHz ECC UDIMM CL19 1.2V 2Rx8 288-pin memory upgrade

SKU CH-0ZWC-CRA5S

64 GB kit of four 16 GB DDR4 2666 MHz ECC UDIMM modules for Synology RS2818RP+ NAS

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • 64GB total capacity expands NAS multitasking headroom
  • ECC protection guards data integrity in Synology RS2818RP+
  • 2666MHz DDR4 speed matches system spec for stable operation
  • CL19 latency at 1.2V keeps power draw low
  • Four 16GB unbuffered UDIMMs install without tools

Synology RS2818RP+ memory kit

This 64GB kit contains four 16GB DDR4 2666MHz ECC UDIMM modules built for the Synology RackStation RS2818RP+. Each stick runs at 1.2V with CL19 latency and a 2Rx8 organisation. The unbuffered design fits the 288-pin slots in this NAS platform. It targets administrators who need the maximum supported capacity for virtualisation or heavy file workloads.

Upgrade from lower-capacity or non-ECC DIMMs

The kit replaces smaller or non-ECC memory that limits multitasking and data integrity on the RS2818RP+. Moving to 64GB lets the system hold more VMs and larger caches without swapping. The ECC function corrects single-bit errors that standard modules would miss. Backward compatibility with 2133MHz and 2400MHz buses means the kit also works if the chassis originally shipped with slower DIMMs.

Tool-less DIMM installation

Installation requires opening the chassis, seating each module in the 288-pin slots until the latches click, then closing the cover. No heat spreaders are present, so clearance is not an issue. The main risk is mixing these ECC UDIMMs with registered or non-ECC sticks, which prevents the system from posting. Populating all four channels with identical modules avoids timing mismatches.

أبرز المميزات

  • 64GB total capacity expands NAS multitasking headroom
  • ECC protection guards data integrity in Synology RS2818RP+
  • 2666MHz DDR4 speed matches system spec for stable operation
  • CL19 latency at 1.2V keeps power draw low
  • Four 16GB unbuffered UDIMMs install without tools

المواصفات

BrandOWC
Part Number2E6D42R8064S
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSynology RackstationRS2818RP+

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will the 288-pin DDR4 UDIMM modules fit the four DIMM slots in my Synology RackStation RS2818RP+?

Yes, each 16 GB module uses the standard 288-pin DDR4 UDIMM form factor that matches the four slots in the RS2818RP+.

What is the correct installation sequence for the four 2Rx8 modules, and what step do people often miss?

Power down, open the chassis, insert each module at a 30-degree angle until the side clips click, then verify the system reports 64 GB at 2666 MHz.

Do these ECC UDIMMs require any firmware updates or periodic replacement after installation?

No firmware update is needed; the JEDEC-compliant 1.2 V modules run maintenance-free for the life of the NAS.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.