BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
8 GB DDR4 3200 SODIMM upgrade for ASUSTOR FS6706T and FS6712X NAS units
This 8GB DDR4 3200 module is built for ASUSTOR FS6706T and FS6712X systems. It replaces the original AS-8GD4 part with a JEDEC-standard upgrade. The single 1Rx8 stick adds capacity without requiring matched pairs. It targets owners who need more memory for virtualisation or heavy file workloads.
The module uses a standard 260-pin SODIMM edge connector and runs at 1.2V with CL22 timing. No heat spreader is fitted, so it fits tight NAS chassis without clearance issues. Installation is a straightforward DIY task that does not void the system warranty. JEDEC and ROHS compliance ensures electrical compatibility with the factory memory controller.
This part directly substitutes the OEM AS-8GD4 module in the listed ASUSTOR models. The upgrade is worthwhile when the stock capacity limits concurrent Docker containers or large-volume transfers. It does not serve systems that require ECC or registered DIMMs. Buyers needing higher total capacity must populate additional slots with identical modules.
| Brand | OWC |
|---|---|
| Part Number | 3S2D41R808GB |
| Capacity | 8GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | ASUSTOR FS6706T ASUSTOR FS6712X |
The module runs at DDR4 3200 with CL22 latency, so the PC4-25600 rating means 3200 MT/s data transfer on the 260-pin interface.
Yes — it is a 260-pin DDR4 SODIMM at 1.2 V, matching the slot and voltage used by both ASUSTOR models.
Align the notch, insert at an angle, then press down firmly until both side clips click; the step most often missed is verifying both clips have fully engaged.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟