Phanteks PH-F120M25_G2_BBK01 120mm PWM case fan 350-2000 RPM 72.72 CFM 2.51 mmH2O 35.13 dBA Black
- 1 Fan
- No Controller
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Phanteks
120 mm PWM case fan with hydraulic bearing, 500–2000 RPM, 84.26 CFM airflow and 35.7 dB(A) noise, daisy-chain cable included
Fan Size 120mm
Style Regular / No DRGB
Model M25
Option Single Fan
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The Phanteks M25-120 is a 120mm case fan built for high-airflow radiator performance. It suits builders who need strong static pressure through fine mesh, dust filters or dense heatsinks. The single black unit uses a hydraulic bearing and a 4-pin PWM connector for motherboard control. It is not for buyers who want addressable lighting or a multi-fan kit in one box.
At 500 RPM the fan runs quietly while still moving air through restrictive surfaces. Speed ramps up to 2000 RPM under PWM control, delivering 84.26 CFM at a measured 35.7 dB(A). The hydraulic bearing keeps motor and bearing noise low across the range. Daisy-chain cabling lets several fans share one PWM header without extra splitters.
Under continuous load the fan maintains its 2000 RPM ceiling to cool high-output components without throttling. The wide 500-2000 RPM span allows the curve to stay low until heat demands more flow. Hydraulic bearing lubrication is rated for long-term operation at constant speed. No DRGB LEDs means no extra heat or cable clutter during extended runs.
| Brand | Phanteks |
|---|---|
| Model | M25-120 Fan, Black |
| Part Number | PH-F120M25_PWM_BBK01 |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500-2000±10% RPM |
| Air Flow | 84.26 CFM |
| Noise Level | 35.7 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | No DRGB |
| وزن الشحنة | 0.15 kg |
| أبعاد الطرد | 120 × 120 × 25 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Mount the 120mm × 25mm frame using the four corner screws, then plug the 4-pin PWM connector into a motherboard or controller header. The frequent error is inserting the daisy-chain output instead of the primary PWM plug, which leaves speed control inactive.
The sealed hydraulic bearing runs 500-2000±10% RPM without user lubrication. Expect service life to end when noise rises above the rated 35.7 dB(A) or airflow drops below 84.26 CFM; at that point replace the entire fan.
At the top 2000 RPM setting the acoustic output reaches the specified 35.7 dB(A) before vibration or thermal limits become noticeable, making noise the first constraint during continuous high-load operation.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟