Phanteks PH-F140M25_G2_DBK01 140mm case fan 1800 RPM 101.78 CFM
- 1 Fan
- No Controller
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Phanteks
A 140 mm PWM case fan delivering 104.62 CFM at 36.57 dB(A) with daisy-chain cabling
Fan Size 140mm
Style Regular / No DRGB
Model M25
Option Single Fan
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The Phanteks M25-140 is a single 140mm by 25mm case fan built for high static pressure. It targets builders who need strong airflow through dense fin stacks such as radiators or heatsinks. The hydraulic bearing and wide PWM range suit both quiet daily use and demanding cooling loads. It connects via a standard 4-pin header and includes no lighting.
At lower RPM settings the fan moves air through restrictive filters and radiators while keeping motor and bearing noise low. The supplier rates noise at 36.57 dB(A) and airflow at 104.62 CFM when the fan runs at its 1800 RPM maximum. PWM control allows precise adjustment between 500 and 1800 RPM so acoustic output matches the thermal demand. A single 4-pin connector powers the unit.
Under continuous high-load operation the fan maintains its rated speed to deliver consistent cooling for powerful components. The hydraulic bearing is designed for durability during prolonged use at elevated RPM. Daisy-chain cabling lets multiple fans share one PWM signal, though each additional unit adds to the total current draw on that single header. Buyers who need more than one fan per header should verify their motherboard's current limit.
| Brand | Phanteks |
|---|---|
| Model | M25-140 Fan, Black |
| Part Number | PH-F140M25_PWM_BBK01 |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500-1800±10% RPM |
| Air Flow | 104.62 CFM |
| Noise Level | 36.57 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | No DRGB |
| وزن الشحنة | 0.27 kg |
| أبعاد الطرد | 203 × 142 × 89 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Plug the first fan's 4-pin connector into the CPU or chassis fan header, then link additional fans using the daisy-chain leads; the motherboard controls all fans from that single header.
The sealed hydraulic bearing is maintenance-free; replace the fan only if noise rises above 36.57 dB(A) or airflow drops below 104.62 CFM after years of continuous use.
When the curve hits 1800 RPM the fan cannot spin faster, so any extra heat must be handled by adding more fans or improving case airflow instead.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟