نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Ruth's sister

Ruth's sister TF600 600W ATX power supply

SKU CH-PH1X-JZ5MG

Delivers up to 600W with active PFC, a 120mm fan and non-modular cables for desktop and server builds

  • Real 500 W continuous output for stable desktop and server loads
  • 120 mm silent fan keeps temperatures low during gaming sessions
  • Active PFC improves power efficiency on 220 V mains
  • Four SATA connectors support multiple storage drives
  • Non-modular design with 20+4 pin ATX and dual 6+2 pin GPU cables

Power supply for desktop and server builds

The Ruth's sister TF600 is a non-modular ATX power supply rated at 500 W continuous with a 600 W peak. It uses active PFC and runs from a 220 V input. A 120 mm fan provides cooling while the unit supplies power through fixed cables.

Suits basic office or entry gaming rigs

This unit fits systems that need a 20+4 pin motherboard connector, a 4+4 pin CPU connector, four SATA drives and two 6+2 pin graphics connectors. Builds requiring modular cables, higher continuous wattage or 80 PLUS Bronze efficiency or above should look elsewhere.

Delivers 500 W steady with 600 W headroom

The 12 V rail feeds the CPU and both 6+2 pin connectors for mid-range graphics cards. Four SATA ports handle storage while four D-type connectors cover legacy devices. Continuous loads above 500 W exceed the rated output.

أبرز المميزات

  • Real 500 W continuous output for stable desktop and server loads
  • 120 mm silent fan keeps temperatures low during gaming sessions
  • Active PFC improves power efficiency on 220 V mains
  • Four SATA connectors support multiple storage drives
  • Non-modular design with 20+4 pin ATX and dual 6+2 pin GPU cables

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

What motherboard power connector does the TF600 require to turn on?

The TF600 uses a 20+4 pin ATX connector measuring 56 cm to supply the motherboard.

Can the two 6+2 pin PCIe connectors power an older graphics card that only needs a single 6 pin?

Yes, each 6+2 pin lead can be used as a 6 pin by leaving the extra 2 pins unattached.

How can I confirm the PSU is running correctly once installed?

The 120 mm fan should spin quietly and the system should power on without unexpected shutdowns.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.