暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black ATX power supply unit with 120mm fan and fixed cables

Ruth's sister

Ruth's sister TF600 600W ATX power supply

SKU CH-PH1X-JZ5MG

Delivers up to 600W with active PFC, a 120mm fan and non-modular cables for desktop and server builds

  • Real 500 W continuous output for stable desktop and server loads
  • 120 mm silent fan keeps temperatures low during gaming sessions
  • Active PFC improves power efficiency on 220 V mains
  • Four SATA connectors support multiple storage drives
  • Non-modular design with 20+4 pin ATX and dual 6+2 pin GPU cables

Power supply for desktop and server builds

The Ruth's sister TF600 is a non-modular ATX power supply rated at 500 W continuous with a 600 W peak. It uses active PFC and runs from a 220 V input. A 120 mm fan provides cooling while the unit supplies power through fixed cables.

Suits basic office or entry gaming rigs

This unit fits systems that need a 20+4 pin motherboard connector, a 4+4 pin CPU connector, four SATA drives and two 6+2 pin graphics connectors. Builds requiring modular cables, higher continuous wattage or 80 PLUS Bronze efficiency or above should look elsewhere.

Delivers 500 W steady with 600 W headroom

The 12 V rail feeds the CPU and both 6+2 pin connectors for mid-range graphics cards. Four SATA ports handle storage while four D-type connectors cover legacy devices. Continuous loads above 500 W exceed the rated output.

特長

  • Real 500 W continuous output for stable desktop and server loads
  • 120 mm silent fan keeps temperatures low during gaming sessions
  • Active PFC improves power efficiency on 220 V mains
  • Four SATA connectors support multiple storage drives
  • Non-modular design with 20+4 pin ATX and dual 6+2 pin GPU cables

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What motherboard power connector does the TF600 require to turn on?

The TF600 uses a 20+4 pin ATX connector measuring 56 cm to supply the motherboard.

Can the two 6+2 pin PCIe connectors power an older graphics card that only needs a single 6 pin?

Yes, each 6+2 pin lead can be used as a 6 pin by leaving the extra 2 pins unattached.

How can I confirm the PSU is running correctly once installed?

The 120 mm fan should spin quietly and the system should power on without unexpected shutdowns.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。