Sabrent
Sabrent SB-HTSK M.2 2280 Heatsink
An M.2 2280 heatsink using copper and aluminum to absorb and spread heat from NVMe SSDs, supplied with thermal tape, screws and a screwdriver for easy desktop installation
- Device TypeHeatsink ssd
- Used ForConsumer
- Form FactorM.2 2280
- HeatSinkwith HeatSink
- FeaturesDesigned for desktop computers. Winning combination of coppe
- Height3.1"
- Copper and aluminum construction draws heat away from the drive
- Grooved aluminum surface increases cooling area to reduce thermal throttling
- Fits single-sided and double-sided M.2 2280 SSDs
- Thermal tape, screws and screwdriver included for quick fitting
- Compact 3.1 by 1.0 by 0.9 inch profile suits desktop builds
M.2 2280 SSD heatsink
The Sabrent SB-HTSK is a passive cooler built for M.2 2280 solid-state drives in desktop computers. It uses a copper base to draw heat from the controller and NAND, then spreads it across a grooved aluminium fin stack. Thermal tape, mounting screws and a screwdriver are supplied in the package.
Fits single and double-sided drives
The bracket clamps over both single-sided and double-sided M.2 2280 modules without blocking adjacent slots. Installation requires no extra tools beyond the included screwdriver and adds only 3.1 inches of length, 1.0 inch of width and 0.9 inch of height to the drive profile. The copper-aluminium construction moves heat away from the PCB so the drive can sustain its rated throughput.
Replaces stock motherboard shields
Builders whose motherboard heatsink is missing, too low or incompatible with double-sided modules gain a universal alternative. The jump is worth it when an NVMe drive throttles under sustained writes or when the factory pad does not contact all components. It is not for laptops or systems that rely on the original motherboard shield for structural retention.
أبرز المميزات
- Copper and aluminum construction draws heat away from the drive
- Grooved aluminum surface increases cooling area to reduce thermal throttling
- Fits single-sided and double-sided M.2 2280 SSDs
- Thermal tape, screws and screwdriver included for quick fitting
- Compact 3.1 by 1.0 by 0.9 inch profile suits desktop builds
المواصفات
| Brand | Sabrent |
|---|---|
| Series | Heatsink |
| Model | SB-HTSK |
| Device Type | Heatsink ssd |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| HeatSink | with HeatSink |
| Features | Designed for desktop computers. Winning combination of copper and aluminum for maximum performance. Compatible with Single/Double sided M.2 2280 SSDs. Thermal tape, screws, & screwdriver included! Easy to install. |
| Height | 3.1" |
| Width | 1.0" |
| Depth | 0.9" |
| Package Content | • Rocket NVMe Heatsink. • Thermal tap. • Screws. • Screwdriver. • Installation guide. |
| وزن الشحنة | 0.17 kg |
| أبعاد الطرد | 110 × 77 × 28 mm |
أسئلة حول هذا المنتج
Will the 3.1 inch height fit inside my desktop case without blocking other components?
The heatsink stands 3.1 inches tall, 1.0 inch wide and 0.9 inch deep, so measure your motherboard clearance before installing.
Does the aluminium and copper construction stay quiet and cool during continuous heavy writes?
The passive copper-and-aluminium design has no fan, so it runs silently while spreading heat across the grooved aluminium fins to limit thermal throttling.
What tools or extra parts do I need before I can mount this on my M.2 2280 drive?
Thermal tape, mounting screws and a screwdriver are all included in the package, so no additional tools are required.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0.82 US$
0.00001048BTC
متوفر