نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular M.2 circuit board with gold edge connector and black controller chips

SAMSUNG

SAMSUNG MZ1L2960HCJR-00A07 960GB enterprise SSD

SKU CH-NTH1-82C11 MPN MZ1L2960HCJR-00A07

M.2 960GB NVMe drive delivering 6800 MB/s reads and 4000 MB/s writes for enterprise workloads

  • Form FactorM.2
  • Capacity960GB
  • InterfacePCI-Express 4.0 x4
  • Max Sequential ReadUp To 6800mbps
  • Max Sequential WriteUp To 4000mbps
  • 4KB Random ReadUp to 1,000,000 IOPS

Capacity 960GB

  • 1.9TB
  • 3.8TB
  • 960GB

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

  • Fast boot and load times with up to 6800 MB/s sequential read
  • Responsive heavy workloads via up to 4000 MB/s sequential write
  • Smooth random access at up to 1,000,000 IOPS read
  • Consistent write performance up to 180,000 IOPS
  • Compact M.2 form factor fits dense server builds

Samsung PM9A3 960GB Enterprise NVMe SSD

The Samsung PM9A3 is a 960GB enterprise-class solid-state drive in the M.2 form factor. It connects via a PCI-Express 4.0 x4 interface and delivers sequential reads up to 6800mbps and writes up to 4000mbps. Random read performance reaches 1,000,000 IOPS while random writes hit 180,000 IOPS. This new drive targets servers and workstations that need high-throughput, low-latency storage.

Suited for PCIe 4.0 platforms needing 960GB capacity

This drive fits systems with an M.2 slot wired for PCI-Express 4.0 x4 and workloads that benefit from its read-heavy performance profile. It is not appropriate for platforms limited to PCIe 3.0 or lower, nor for buyers who require larger capacities or higher random write endurance than 180,000 IOPS.

PCI-Express 4.0 x4 interface decides compatibility

The single specification that determines fit is the PCI-Express 4.0 x4 interface; the host must provide an M.2 slot electrically wired for four lanes of PCIe 4.0 to achieve the rated 6800mbps read and 4000mbps write speeds. Without that link width and generation the drive will fall back to lower performance.

أبرز المميزات

  • Fast boot and load times with up to 6800 MB/s sequential read
  • Responsive heavy workloads via up to 4000 MB/s sequential write
  • Smooth random access at up to 1,000,000 IOPS read
  • Consistent write performance up to 180,000 IOPS
  • Compact M.2 form factor fits dense server builds

المواصفات

BrandSAMSUNG
SeriesPM9A3
Part NumberMZ1L2960HCJR-00A07
Form FactorM.2
Capacity960GB
InterfacePCI-Express 4.0 x4
Max Sequential ReadUp To 6800mbps
Max Sequential WriteUp To 4000mbps
4KB Random ReadUp to 1,000,000 IOPS
4KB Random WriteUp to 180,000 IOPS
وزن الشحنة0.18 kg
أبعاد الطرد152 × 51 × 18 mm

أسئلة حول هذا المنتج

Does my motherboard need an M.2 slot with PCIe 4.0 x4 lanes for this PM9A3 drive to work?

The drive uses an M.2 form factor and a PCI-Express 4.0 x4 interface, so the board must provide an M.2 slot wired for PCIe 4.0 x4.

Will this NVMe SSD run in a PCIe 3.0 M.2 slot if I keep my current server board?

It is backward compatible with PCIe 3.0 slots, though sequential speeds will be limited to the 3.0 x4 ceiling.

How can I verify the drive is delivering its rated 6800 MB/s read and 4000 MB/s write after installation?

Run a sequential benchmark such as CrystalDiskMark or fio; sustained reads near 6800 MB/s and writes near 4000 MB/s confirm expected operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.