SanDisk Optimus GX 7100 500GB M.2 2280-S3-M PCIe 4.0 x4 NVMe internal SSD SDSP71500GAN-000E0
- Internal Solid Stat…
- M.2 2280-S3-M
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
SanDisk
4 TB M.2 2280-S3-M internal SSD with PCI-Express 4.0 x4 interface, NVMe 2.0 protocol, up to 7000 MBps sequential read, 6700 MBps sequential write, 900000 IOPS random read.
The SanDisk Optimus GX 7100 is a 4TB internal SSD built to the M.2 2280-S3-M form factor. It connects over a PCI-Express 4.0 x4 link using the NVMe 2.0 protocol. The drive uses 3D NAND TLC memory and ships without a heatsink.
This drive fits desktops and laptops that have an M.2 2280 slot wired for PCIe 4.0 x4 and can accommodate a single-sided module. Systems limited to PCIe 3.0 or shorter M.2 keys will not reach the stated speeds. Builds that require a factory-fitted heatsink should consider other models.
Verify the motherboard or laptop provides an M.2 2280-S3-M socket with PCIe 4.0 x4 electrical wiring. Confirm the operating temperature range of 0 to 85 °C matches the chassis airflow. Ensure the firmware supports NVMe 2.0 features before installation.
| Brand | SanDisk |
|---|---|
| Series | Optimus GX 7100 |
| Model | SDSP71400TAN-000E0 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280-S3-M |
| Capacity | 4TB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 2.0 |
| Max Sequential Read | Up to 7000 MBps |
| Max Sequential Write | Up to 6700 MBps |
| 4KB Random Read | Up to 900,000 IOPS |
| 4KB Random Write | Up to 1,350,000 IOPS |
| Terabytes Written (TBW) | 2400TB |
| MTBF | 1,750,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | Average Active Power Read: 4.1W Average Active Power Write: 4.0W |
| Operating Temperature | 0°C ~ +85°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G @ 0.5 ms half-sine |
| Max Vibration Resistance | Operating Vibration: 5 gRMS, 10-2000 Hz, 3 axes Non-operating Vibration: 4.9 gRMS, 7-800 Hz, 3 axes |
| Height | 2.38mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 5.8g |
| وزن الشحنة | 0.05 kg |
| أبعاد الطرد | 127 × 102 × 22 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The drive uses the M.2 2280-S3-M form factor, so the slot must accept 80 mm modules with an M-key connector.
It is a PCIe 4.0 x4 NVMe 2.0 drive; in a 3.0 slot it will operate at PCIe 3.0 speeds instead of the rated 7000 MBps read and 6700 MBps write.
Run a 4 KB random read/write test and look for results near 900,000 IOPS read and 1,350,000 IOPS write.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟