نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Rectangular silver 3.5 inch enterprise hard drive with SAS connector and label showing model ST4000NM0023

Seagate

Seagate ST4000NM0023 4TB 7200 RPM 128MB SAS 6Gb/s 3.5" internal hard drive

SKU CH-XT6S-C8E00 MPN ST4000NM0023

Enterprise-grade 4 TB SAS drive with 7200 RPM and 128 MB cache for bulk-data storage

  • InterfaceSAS 6Gb/s
  • Capacity4TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Cache128MB
  • Average Latency4.16ms
  • Enterprise-grade 4TB capacity for bulk-data workloads
  • SAS 6Gb/s interface delivers consistent throughput
  • 7200 RPM spindle speed supports rapid data access
  • 128MB cache buffers heavy I/O operations
  • 16ms average latency keeps response times low

Enterprise capacity drive

The Seagate Constellation ES.3 ST4000NM0023 is a 4TB 3.5-inch internal hard drive built for enterprise storage arrays. It spins at 7200 RPM with a 128MB cache and connects through a SAS 6Gb/s interface. The drive is supplied in refurbished condition.

Suits bulk-data arrays, not desktop boot

This drive suits administrators expanding RAID sets, backup targets or cold-storage tiers where high capacity and sustained write endurance matter. It is not for builders who need a SATA-only controller, a 2.5-inch form factor, or a consumer warranty bundle.

SAS 6Gb/s interface decides fit

The SAS 6Gb/s interface is the single specification that determines compatibility; the drive requires a backplane or controller that supports SAS signalling. A SATA-only host bus adapter cannot negotiate the link, so the drive will not be recognised.

أبرز المميزات

  • Enterprise-grade 4TB capacity for bulk-data workloads
  • SAS 6Gb/s interface delivers consistent throughput
  • 7200 RPM spindle speed supports rapid data access
  • 128MB cache buffers heavy I/O operations
  • 16ms average latency keeps response times low

المواصفات

BrandSeagate
SeriesConstellation ES.3
ModelST4000NM0023
InterfaceSAS 6Gb/s
Capacity4TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Cache128MB
Average Latency4.16ms
FeaturesCapacity-Optimized Enterprise Hard Drive for Bulk-Data Applications
- Highest-capacity large form factor enterprise drive - up to 4TB - for demanding data growth
- Sixth-generation drive technology with SAS and SATA interfaces for 24x7 reliability
- Enhanced error correction, super parity and end-to-end SAS-based data integrity for accurate data storage
- Industry-leading rotational vibration tolerance ensures consistent performance
- Improved power and cooling efficiencies with low power consumption and on-demand PowerChoice technology based on T10/T13 power management standards
- M
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.85mm
Length (maximum)147.00mm
وزن الشحنة0.72 kg
أبعاد الطرد178 × 140 × 38 mm

أسئلة حول هذا المنتج

Should I pick the 4TB model or a different capacity for my storage array?

This specific unit is the 4TB capacity; other capacities are separate part numbers not covered by this listing.

What does the 7200 RPM speed mean for daily workloads?

The spindle rotates at 7200 RPM with a 4.16ms average latency, delivering consistent throughput for bulk-data enterprise applications.

Will the SAS 6Gb/s interface limit performance on my controller?

The drive uses a SAS 6Gb/s interface, so the link caps at 6Gb/s; actual throughput depends on your controller and system configuration.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.