Seagate
Seagate ST4000NM0023 4TB 7200 RPM 128MB SAS 6Gb/s 3.5" internal hard drive
Enterprise-grade 4 TB SAS drive with 7200 RPM and 128 MB cache for bulk-data storage
- InterfaceSAS 6Gb/s
- Capacity4TB
- NAND Flash Memory TypeSLC
- RPM7200 RPM
- Cache128MB
- Average Latency4.16ms
- Enterprise-grade 4TB capacity for bulk-data workloads
- SAS 6Gb/s interface delivers consistent throughput
- 7200 RPM spindle speed supports rapid data access
- 128MB cache buffers heavy I/O operations
- 16ms average latency keeps response times low
Enterprise capacity drive
The Seagate Constellation ES.3 ST4000NM0023 is a 4TB 3.5-inch internal hard drive built for enterprise storage arrays. It spins at 7200 RPM with a 128MB cache and connects through a SAS 6Gb/s interface. The drive is supplied in refurbished condition.
Suits bulk-data arrays, not desktop boot
This drive suits administrators expanding RAID sets, backup targets or cold-storage tiers where high capacity and sustained write endurance matter. It is not for builders who need a SATA-only controller, a 2.5-inch form factor, or a consumer warranty bundle.
SAS 6Gb/s interface decides fit
The SAS 6Gb/s interface is the single specification that determines compatibility; the drive requires a backplane or controller that supports SAS signalling. A SATA-only host bus adapter cannot negotiate the link, so the drive will not be recognised.
Besonderheiten
- Enterprise-grade 4TB capacity for bulk-data workloads
- SAS 6Gb/s interface delivers consistent throughput
- 7200 RPM spindle speed supports rapid data access
- 128MB cache buffers heavy I/O operations
- 16ms average latency keeps response times low
Technische Daten
| Brand | Seagate |
|---|---|
| Series | Constellation ES.3 |
| Model | ST4000NM0023 |
| Interface | SAS 6Gb/s |
| Capacity | 4TB |
| NAND Flash Memory Type | SLC |
| RPM | 7200 RPM |
| Cache | 128MB |
| Average Latency | 4.16ms |
| Features | Capacity-Optimized Enterprise Hard Drive for Bulk-Data Applications - Highest-capacity large form factor enterprise drive - up to 4TB - for demanding data growth - Sixth-generation drive technology with SAS and SATA interfaces for 24x7 reliability - Enhanced error correction, super parity and end-to-end SAS-based data integrity for accurate data storage - Industry-leading rotational vibration tolerance ensures consistent performance - Improved power and cooling efficiencies with low power consumption and on-demand PowerChoice technology based on T10/T13 power management standards - M |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| Height (maximum) | 26.10mm |
| Width (maximum) | 101.85mm |
| Length (maximum) | 147.00mm |
| Versandgewicht | 0.72 kg |
| Paketgröße | 178 × 140 × 38 mm |
Fragen zu diesem Artikel
Should I pick the 4TB model or a different capacity for my storage array?
This specific unit is the 4TB capacity; other capacities are separate part numbers not covered by this listing.
What does the 7200 RPM speed mean for daily workloads?
The spindle rotates at 7200 RPM with a 4.16ms average latency, delivering consistent throughput for bulk-data enterprise applications.
Will the SAS 6Gb/s interface limit performance on my controller?
The drive uses a SAS 6Gb/s interface, so the link caps at 6Gb/s; actual throughput depends on your controller and system configuration.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.



