نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green 3.5 inch IDE to SATA adapter card with connectors

SMUGDESK

SMUGDESK 3.5 Inch IDE to SATA Adapter Card

SKU CH-D06W-KQ95C

Converts 3.5-inch IDE drives and optical drives to SATA for use with modern motherboards

  • Convert legacy IDE drives to modern SATA motherboards
  • Standard 3.5-inch form factor fits desktop drive bays
  • Supports IDE hard drives and optical drives
  • Plug-and-play installation requires no driver setup
  • Optimised PCB layout ensures stable data transmission

3.5-Inch IDE-to-SATA Bridge

This adapter card converts a legacy parallel IDE interface to a serial SATA connection. It lets you reuse functional IDE optical drives and 3.5-inch IDE hard drives on motherboards that lack native IDE ports. The board mounts in a standard 3.5-inch drive bay for a tidy internal installation.

Plug-and-Play Signal Conversion

No driver installation is required; the operating system identifies the connected IDE device automatically after the hardware connection is made. The design supports normal read and write operations for compatible IDE CD-ROM, DVD-ROM, and mechanical hard drives. An optimized PCB layout minimizes electromagnetic interference to maintain stable bidirectional data transmission.

Upgrade Path for Legacy Storage

This replaces the need for a motherboard with an onboard IDE controller or a separate PCI IDE expansion card. The jump is worthwhile when you have working IDE drives or optical media to access but your current or planned motherboard only provides SATA ports. It is not suited for users needing to connect SATA drives to an IDE-only system or for laptop 2.5-inch IDE drives without a separate bracket.

أبرز المميزات

  • Convert legacy IDE drives to modern SATA motherboards
  • Standard 3.5-inch form factor fits desktop drive bays
  • Supports IDE hard drives and optical drives
  • Plug-and-play installation requires no driver setup
  • Optimised PCB layout ensures stable data transmission

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Should I choose this 3.5-inch adapter or a different form factor for my desktop case?

The adapter uses a standard 3.5-inch mounting frame that fits directly into a desktop hard-drive bay, so no extra brackets are needed.

What transfer speed will I actually see when I connect an old IDE drive through this card?

The adapter bridges parallel IDE to serial SATA, so real-world throughput is limited by the IDE drive itself — typically well below the SATA interface ceiling.

Does this converter use a standard SATA interface, and what does that limit in practice?

It presents a regular SATA data port to the motherboard, meaning the connection is capped by the legacy IDE device’s own maximum transfer rate.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.