نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small green circuit board with mSATA slot and SATA connector

SMUGDESK

SMUGDESK mSATA to 7PIN SATA Converter Card

SKU CH-Z56G-S99K6

Converts an mSATA SSD to a standard 7-pin SATA interface supporting SATA 1.0, 2.0 and 3.0 for desktop or laptop storage expansion

  • Converts mSATA SSD to standard SATA interface
  • Supports SATA 1.0, 2.0 and 3.0 protocols
  • Plug-and-play operation with no driver installation needed
  • Compact PCB design saves internal device space
  • Stable signal transmission for reliable storage upgrades

mSATA to 7PIN SATA Converter Card

This adapter converts an mSATA solid-state drive to a standard 7PIN SATA signal interface. It allows the drive to connect to desktop or laptop motherboards and SATA backplanes. The board supports SATA 1.0, 2.0 and 3.0 transmission protocols for normal read and write operation.

Builders reusing an existing mSATA SSD

The card suits anyone upgrading an older system or migrating a system disk without buying a new drive. It requires a separate SATA power connection for the mSATA SSD, so buyers who need a combined power-and-signal connector should look at a different adapter type. The compact PCB fits tight spaces inside a case or modified notebook.

7PIN SATA signal-only interface

This is the single specification that decides compatibility. The adapter provides only the 7PIN data link; an independent SATA power cable must supply the drive. If your host cannot deliver separate SATA power, the card will not work for your installation.

أبرز المميزات

  • Converts mSATA SSD to standard SATA interface
  • Supports SATA 1.0, 2.0 and 3.0 protocols
  • Plug-and-play operation with no driver installation needed
  • Compact PCB design saves internal device space
  • Stable signal transmission for reliable storage upgrades

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

How can I confirm the adapter is passing data correctly after connecting my mSATA SSD?

The drive should appear in BIOS or disk management at SATA 1.0, 2.0 or 3.0 speed, and you can run a quick read/write test to verify stable throughput.

What comes with the converter card and what must I supply separately?

The package includes only the mSATA to 7PIN SATA adapter board; you must provide a separate SATA power cable for the mSATA SSD.

Which SATA specification should I match when choosing this adapter for my mSATA drive?

This card supports SATA 1.0, 2.0 and 3.0, so it works with any mSATA SSD that operates under those three standards.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.