暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small green circuit board with mSATA slot and SATA connector

SMUGDESK

SMUGDESK mSATA to 7PIN SATA Converter Card

SKU CH-Z56G-S99K6

Converts an mSATA SSD to a standard 7-pin SATA interface supporting SATA 1.0, 2.0 and 3.0 for desktop or laptop storage expansion

  • Converts mSATA SSD to standard SATA interface
  • Supports SATA 1.0, 2.0 and 3.0 protocols
  • Plug-and-play operation with no driver installation needed
  • Compact PCB design saves internal device space
  • Stable signal transmission for reliable storage upgrades

mSATA to 7PIN SATA Converter Card

This adapter converts an mSATA solid-state drive to a standard 7PIN SATA signal interface. It allows the drive to connect to desktop or laptop motherboards and SATA backplanes. The board supports SATA 1.0, 2.0 and 3.0 transmission protocols for normal read and write operation.

Builders reusing an existing mSATA SSD

The card suits anyone upgrading an older system or migrating a system disk without buying a new drive. It requires a separate SATA power connection for the mSATA SSD, so buyers who need a combined power-and-signal connector should look at a different adapter type. The compact PCB fits tight spaces inside a case or modified notebook.

7PIN SATA signal-only interface

This is the single specification that decides compatibility. The adapter provides only the 7PIN data link; an independent SATA power cable must supply the drive. If your host cannot deliver separate SATA power, the card will not work for your installation.

特長

  • Converts mSATA SSD to standard SATA interface
  • Supports SATA 1.0, 2.0 and 3.0 protocols
  • Plug-and-play operation with no driver installation needed
  • Compact PCB design saves internal device space
  • Stable signal transmission for reliable storage upgrades

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How can I confirm the adapter is passing data correctly after connecting my mSATA SSD?

The drive should appear in BIOS or disk management at SATA 1.0, 2.0 or 3.0 speed, and you can run a quick read/write test to verify stable throughput.

What comes with the converter card and what must I supply separately?

The package includes only the mSATA to 7PIN SATA adapter board; you must provide a separate SATA power cable for the mSATA SSD.

Which SATA specification should I match when choosing this adapter for my mSATA drive?

This card supports SATA 1.0, 2.0 and 3.0, so it works with any mSATA SSD that operates under those three standards.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。