HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Solidigm
A 7.68 TB E1.S enterprise SSD delivering 6600 MB/s reads and 4200 MB/s writes with 14.0 PBW endurance
The Solidigm D7-P5520 delivers 7.68TB of capacity in the E1.S 9.5mm form factor. It connects over PCI-Express 4.0 x4 and uses 3D NAND TLC memory. The drive is built for data centre and server environments that need high-density storage in a compact footprint.
With 7.68TB of usable space the drive accommodates large datasets, virtualisation images and warm-tier workloads. Endurance is rated at 14.0 PBW, so sustained write traffic is supported until the written data approaches that threshold. Sequential reads reach 6600 MBps and writes 4200 MBps, while random performance tops out at 1,100,000 read IOPS and 220,000 write IOPS.
The E1.S 9.5mm module weighs 72g and draws 5W idle or 18W active, fitting standard hot-plug cages without extra cabling. It operates from 0°C to 70°C and survives 1,000 G shock plus 2.17 GRMS operating vibration. Builders needing a 15mm or U.2 form factor, or a higher write-endurance tier, should look elsewhere.
| Brand | Solidigm |
|---|---|
| Series | D7-P5520 |
| Part Number | AA0020013 |
| Form Factor | E1.S |
| Capacity | 7.68TB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 6600 MBps |
| Max Sequential Write | Up to 4200 MBps |
| 4KB Random Read | Up to 1,100,000 IOPS |
| 4KB Random Write | Up to 220,000 IOPS |
| Read Latency | 75µs |
| Write Latency | 15µs |
| Endurance | 14.0 PBW |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 18W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 72g +/- 5g |
| وزن الشحنة | 0.20 kg |
| أبعاد الطرد | 160 × 120 × 30 mm |
This drive uses an E1.S PCIe 4.0 x4 interface. It requires a compatible E1.S backplane or adapter; it cannot plug directly into a U.2 PCIe 3.0 slot without a physical and electrical converter.
Run a benchmark tool such as fio or CrystalDiskMark against the drive. Compare the measured sequential read and 4 KB random read results to the rated 6600 MBps and 1100000 IOPS figures.
The single pack contains the 7.68 TB E1.S drive only. Heatsinks, mounting screws and any PCIe adapter brackets are not included and must be sourced separately.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟