Solidigm D7-P5620 SSDPF2KE032T1OS 3.2TB enterprise SSD
- U.2 15mm
- 3.2TB
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Solidigm
Enterprise U.2 15mm SSD delivering 12.8TB capacity with PCIe 4.0 x4 NVMe interface and up to 7100 MB/s sequential read
Options 12.8TB, U.2 15mm, Non-OPAL
The Solidigm D7-P5620 series drive delivers 12.8TB of capacity in a U.2 15mm form factor. It uses 144L TLC 3D NAND and connects via NVMe over PCI Express 4.0 x4. This SSD targets data-centre operators who need dense, high-throughput storage for cloud compute, eCommerce and database workloads.
The 2.5-inch U.2 15mm package fits standard hot-swap bays and backplanes, allowing replacement without system downtime. With an MTBF of 2,000,000 hours and shock resistance rated at 1,000 G, the drive tolerates the vibration and thermal demands of multi-drive server chassis. No OPAL encryption simplifies deployment in environments that manage security at the array or software layer.
Moving to this 12.8TB model can reduce the physical storage footprint by up to 50% and lower power consumption by up to 44% compared with multiple smaller drives. Sequential reads reach 7100 MBps and writes 4300 MBps, while random performance hits 1,000,000 read IOPS and 319,000 write IOPS. The jump is worth it when consolidation, QoS consistency above 90% and accelerated database throughput up to 39% outweigh the cost of a single high-capacity module.
| Brand | Solidigm |
|---|---|
| Series | D7-P5620 SERIES |
| Model | D7-P5620 |
| Part Number | SSDPF2KE128T1N1 |
| Form Factor | U.2 15mm |
| Capacity | 12.8TB |
| Memory Components | 144L TLC 3D NAND |
| Interface | NVMe; PCI Express 4.0 x4 |
| Max Sequential Read | Up to 7100 MBps |
| Max Sequential Write | Up to 4300 MBps |
| MTBF | 2,000,000 hours |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| وزن الشحنة | 0.16 kg |
| أبعاد الطرد | 254 × 127 × 127 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The PCIe 4.0 x4 interface supports up to 7100 MBps sequential read and 4300 MBps sequential write on this SSD.
This 2.5 inch U.2 drive is 15mm thick and requires a bay that accepts 15mm z-height drives.
Slide the U.2 drive into the hot-swap carrier until the connector seats firmly; the common miss is not engaging the latch fully.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟