نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black aluminium 5.25in mobile rack drawer with key lock and cooling fan

STARTECH

STARTECH DRW150SATBK 5.25in SATA 3.5in HDD SSD accessory

SKU CH-3GET-4MA2G MPN DRW150SATBK

A 5.25in bay drawer that hot-swaps a single 3.5in SATA drive with a key lock and built-in cooling fan

  • Mobile Rack Drives Support1 x 3.5" Drives to 5.25" Bay
  • Mobile Rack InterfaceSATA I/II
  • SpecificationsHard Drive Compatibility: 3.5-Inch SATA/300(SATA II) or SATA
  • FeaturesAll aluminum construction for maximum durability and heat di

Model Rugged

  • Turn any 3.5in SATA drive into hot-swap storage for a 5.25in bay
  • All-aluminium body gives maximum durability and heat dissipation
  • Ball-bearing cooling fan keeps the drive running cool
  • Key-lock mechanism prevents accidental drive removal
  • Works with PC or Mac systems that have a 5.25in bay

Rugged 5.25in SATA mobile rack

This black aluminium drawer converts a single 3.5in SATA hard drive or SSD into a front-accessible hot-swap bay that fits a standard 5.25in drive slot. It is built for technicians and system builders who need to move drives between machines without opening the case. The key-lock mechanism prevents accidental ejection while the drive is powered.

Sustained-load thermal behaviour

The all-aluminium chassis acts as a heatsink and a ball-bearing fan draws air across the installed drive during continuous read or write sessions. This combination keeps operating temperatures stable over long backup, imaging or archival workloads instead of letting heat build up in a short burst.

Practical limits of the SATA interface

The caddy supports SATA I and II signalling, so the drive will operate at up to 300 MB/s rather than the 6 Gbps ceiling of later revisions. Systems that only provide a 150 MB/s SATA I port will run the drive at that lower ceiling, and the tray cannot overcome the bandwidth limit of the host controller.

أبرز المميزات

  • Turn any 3.5in SATA drive into hot-swap storage for a 5.25in bay
  • All-aluminium body gives maximum durability and heat dissipation
  • Ball-bearing cooling fan keeps the drive running cool
  • Key-lock mechanism prevents accidental drive removal
  • Works with PC or Mac systems that have a 5.25in bay

المواصفات

BrandStarTech.com
ModelDRW150SATBK
Mobile Rack Drives Support1 x 3.5" Drives to 5.25" Bay
Mobile Rack InterfaceSATA I/II
SpecificationsHard Drive Compatibility: 3.5-Inch SATA/300(SATA II) or SATA/150 (SATA I) Hard Drives
System Requirements: PC or Mac with a 5.25 Inch Drive Bay
Drive Drawer Dimensions: 7.5" x 5.8" x 1.6"
Cooling Fan: Ball-Bearing Fan
Fan Dimensions: 40 x 40 x 10mm
Fan Enclosure: Plastic
Drive Drawer Enclosure: Aluminum
Drive Size: Supports up to 750Gb hard drive
Note: Unit is model specific and is not meant for use with different models of drive drawer unless otherwise stated
FeaturesAll aluminum construction for maximum durability and heat dissipation
Compatibility with PC and MAC's
Designed with a power controlled key lock mechanism that prevents your hard drive from being accidentally removed while in operation
Equipped with a Ball-bearing fan to ensure your hard drive remains cool
Handy LED indicators continuously report on the operating status of the drive drawer
Secure and affordable solution to store and transfer data
Supports hot swap and hot plug-in
Supports SATA/300(SATA II) or SATA/150 hard drives with data transfer rate up to 3 GB/sec.(300 Mb/sec.)
وزن الشحنة0.84 kg
أبعاد الطرد193 × 152 × 48 mm

إصدارات أخرى من هذا الطراز

1 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does the built-in ball-bearing fan keep the 3.5in drive cool during all-day operation?

The aluminum drawer includes a ball-bearing cooling fan that moves air across the drive, while the all-metal body acts as a heatsink to dissipate heat during continuous use.

What must my system already have for this mobile rack to function?

A desktop PC or Mac with a free 5.25in front drive bay, an internal SATA data cable, and a spare SATA power connector from the power supply.

Will my older SATA 150 or SATA 300 hard drives work in this drawer alongside newer drives?

The caddy accepts any 3.5in SATA drive and the SATA I/II interface handles legacy SATA 150 and SATA 300 drives without extra configuration.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.