نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black aluminum standalone SATA drive duplicator with two bays and LCD display

STARTECH

STARTECH SATDUP11 2.5/3.5" SATA Drive Duplicator Eraser

SKU CH-3CB2-WAY3M MPN SATDUP11

Standalone duplicator and eraser clones or sanitises 2.5" and 3.5" SATA drives at up to 14 GBpm without a host computer

  • ColorBlack
  • Size2.5" & 3.5"
  • Typeothers
  • MaterialAluminum
  • Internal Interface2 - SATA Data & Power Combo (7+15 pin) Receptacle
  • Number of Bay2
  • Standalone cloning erases need for a host computer
  • Sector-by-sector mode copies at up to 14 GBpm
  • Sanitises two drives at once with multiple erase modes
  • Meets DoD standards for secure data destruction
  • Tested with 4 TB HDDs and 1 TB SSDs per bay

Standalone SATA Duplicator and Eraser

The StarTech SATDUP11 is a standalone duplicator and eraser for 2.5-inch and 3.5-inch SATA hard drives and solid-state drives. It operates without a host computer and provides three duplication modes including a sector-by-sector copy speed of up to 14 GBpm. An integrated digital LCD display shows operation status and task progress.

Suited for IT sanitisation and cloning workflows

This unit suits technicians who need to clone or sanitise SATA drives to DoD-standard erase modes without tying up a workstation. It supports two drives simultaneously in either 2.5-inch or 3.5-inch form factors. Builders who require interfaces other than SATA should look elsewhere because this duplicator only accepts SATA data and power combo receptacles.

Sector-by-sector copy speed of 14 GBpm

The single specification that decides fit is the maximum sector-by-sector duplication rate of 14 GBpm across the two internal SATA bays. Each bay has been tested with drives up to 4 TB for 3.5-inch hard drives and up to 1 TB for 2.5-inch drives. The package includes a universal AC adapter with regional cords and two SATA cables for immediate deployment.

أبرز المميزات

  • Standalone cloning erases need for a host computer
  • Sector-by-sector mode copies at up to 14 GBpm
  • Sanitises two drives at once with multiple erase modes
  • Meets DoD standards for secure data destruction
  • Tested with 4 TB HDDs and 1 TB SSDs per bay

المواصفات

BrandStarTech.com
ModelSATDUP11
ColorBlack
Size2.5" & 3.5"
Typeothers
MaterialAluminum
Internal Interface2 - SATA Data & Power Combo (7+15 pin) Receptacle
Number of Bay2
Maximum Capacity (per Bay)Currently tested with up to 4TB 7200 RPM 3.5" hard drives per bay and 1TB 7200 RPM 2.5" hard drives per bay
PowerPower Source: AC Adapter Included
Input Voltage: 100 ~ 240 AC
Input Current: 1.4A
Output Voltage: 12 DC
Output Current: 5A
Center Tip Polarity: Positive
FeaturesThree modes of hard drive duplication including Sector-by-Sector at 14 GBpm
Digital LCD Display for operation and task progress
Supports 2.5in or 3.5in form factor hard drives (HDD) or solid state drives (SSD)
Supports SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives
Universal Power Adapter (NA/UK/EU)
Portable light weight design
TAA Compliance (Trade Agreement Act)
Erase up to 2 hard drives with single-pass and multi-pass overwriting / DoD erasing
Dimensions1.20" x 5.10" x 3.10"
Weight0.79 lb.
Package Contents1 - Hard Drive Duplicator and Eraser
2 - SATA Cables
1 - Universal Power Adapter
3 - Regional Power Cords (NA/UK/EU)
2 - HDD Pad
1 - Quick Install Guide
وزن الشحنة1.57 kg
أبعاد الطرد269 × 185 × 127 mm

أسئلة حول هذا المنتج

What SATA drives do I need to use the two internal 7+15-pin receptacles?

The duplicator accepts 2.5" or 3.5" SATA HDDs and SSDs up to 4TB for 3.5" drives and 1TB for 2.5" drives, tested at 7200 RPM.

Can I keep using my existing SATA cables with this unit?

Yes, the package includes two SATA cables for the internal bays; the unit does not require any host computer connection.

How do I verify the duplicator is copying or erasing correctly?

The built-in digital LCD display shows the active mode, progress and completion status for each operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.