Supermicro
Supermicro SYS-6028U-TR4T+ 2U rack server 2× Xeon E5-2690 v4 2.6 GHz 14-core 32 GB DDR4 12-bay 3.5
Dual 14-core Xeon 2.6 GHz server with 32 GB DDR4, 12 hot-swap 3.5" bays, MegaRAID 9361-8i and quad 10GBase-T in 2U
- Rack Height1U
- Redundant Hot-swap PowerYes
- CPU TypeIntel Xeon
- CPU Speed2.60 GHz
- CPU SocketLGA 2011-3
- Number of CPU Cores14-Core Processor
- Dual Xeon E5-2690 v4 CPUs deliver 28 cores at 2.6 GHz base speed
- 32 GB DDR4 ECC memory across 4 modules runs at 2400 MHz
- MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60 with 1 GB cache
- Twelve 3.5" hot-swap bays accept SATA or SAS drives for high capacity
- Quad 10GBase-T ports via Intel X540 plus IPMI 2.0 dedicated management LAN
Dual Xeon 2U server with 12 hot-swap bays
The Supermicro SYS-6028U-TR4T+ is a 2U rackmount server system built around two Intel Xeon E5-2690 v4 processors, each running at 2.6 GHz with 14 cores. It ships with 32 GB of DDR4 registered ECC memory and a MegaRAID 9361-8i controller supporting RAID 0, 1, 5, 6, 10, 50 and 60. Twelve 3.5-inch hot-swap drive bays accept SATA or SAS drives, and quad 10GBase-T ports provide high-speed networking.
Suits virtualization hosts needing dense 3.5-inch
This system fits workloads that benefit from dual-socket compute, large memory capacity and twelve hot-swap bays for spinning disks or SAS SSDs. The four 10GBase-T ports handle heavy east-west traffic without extra cards. Buyers who need more than eight SAS ports on the included RAID controller, or who require a front bezel and rack rails included, should look elsewhere.
RAID controller limited to eight internal SAS ports
The MegaRAID 9361-8i provides eight 12Gb/s SAS lanes with 1 GB cache and battery backup, so only eight of the twelve bays connect directly to hardware RAID. The remaining four bays need an additional HBA or expander, which is not supplied.
أبرز المميزات
- Dual Xeon E5-2690 v4 CPUs deliver 28 cores at 2.6 GHz base speed
- 32 GB DDR4 ECC memory across 4 modules runs at 2400 MHz
- MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60 with 1 GB cache
- Twelve 3.5" hot-swap bays accept SATA or SAS drives for high capacity
- Quad 10GBase-T ports via Intel X540 plus IPMI 2.0 dedicated management LAN
المواصفات
| Brand | SUPERMICRO |
|---|---|
| Series | CSE-829UAC-R1K02-T |
| Model | SYS-6028U-TR4T+ |
| Rack Height | 1U |
| Redundant Hot-swap Power | Yes |
| CPU Type | Intel Xeon |
| CPU Speed | 2.60 GHz |
| CPU Socket | LGA 2011-3 |
| Number of CPU Cores | 14-Core Processor |
| # of Processors Installed | E5-2690 V4 |
| Installed Memory Size | 32GB |
| Storage Controller | LSI MegaRAID 9361-8i Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | No |
| Raid Level | RAID 0/1/5/6/10/50/60 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | SuperMicro AOC-2UR-6-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports |
| Management Port | RJ 45 |
| Features | 12 x 3.5" SATA/SAS Hot-Plug Drive Bays |
أسئلة حول هذا المنتج
What DDR4 memory speed and form factor does the SYS-6028U-TR4T+ require to reach its 1.5 TB capacity?
The system uses 2400 MHz DDR4 Registered ECC DIMMs across 24 slots to reach the 1.5 TB maximum; the unit ships with 32 GB installed.
Will the LSI MegaRAID 9361-8i controller manage all 12 drive bays without an extra expander?
The 9361-8i provides 8 internal SAS ports; the remaining 4 bays need an additional SAS expander or controller to be addressed.
How can I confirm the IPMI 2.0 KVM-over-LAN is active after racking the server?
Connect the dedicated RJ45 management port, browse to the IPMI IP, and verify the remote console launches and shows the POST screen.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
Higole 11.6" Touch All-in-One PC Celeron N5095 8GB 128GB
- 11.6"
- 1366 x 768
Toemaagic All-in-One PC 24" FHD i7 4.0GHz 16GB 512GB White
- Toemaagic
- 16 GB
Lenovo A100 23.8" FHD All-in-One PC Intel N100 32GB DDR4 2TB SSD 1TB Dock Windows 11 Pro White
- All-in-One PC
- All-in-One



