نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small 45 mm black plastic graphics card cooling fan with 39 mm square mounting holes and dual 2-pin and 3-pin connectors

SXDOOL

SXDOOL 45 mm MSI R6450 6570 6670 Blizzard V5 graphics card fan 12 V 0.20 A 39 mm hole spacing 2P&3P

SKU CH-00CG-XE4RJ

45 mm replacement fan for MSI R6450, 6570 and 6670 Blizzard V5 cards with 39 mm hole spacing and dual 2P/3P power connectors

  • Direct replacement for MSI R6450 6570 6670 Blizzard V5
  • 45 mm diameter fits tight GPU shrouds
  • 39 mm square hole spacing matches original mounting
  • Dual 2-pin and 3-pin connectors cover both headers
  • Runs on 12 V drawing only 0.20 A

Replacement fan for MSI R6450 6570 6670 Blizzard V5

This 45 mm cooler is built as a direct swap for the original graphics card fan on MSI R6450, 6570 and 6670 Blizzard V5 boards. It runs on 12 V at 0.20 A and uses a combined 2-pin and 3-pin connector layout. The unit suits owners of those specific cards who need a new cooler master FY04510H12SAA assembly.

Check mounting holes and connector layout

Verify that the card’s screw holes sit on a 39 mm by 39 mm by 39 mm pattern before ordering. The replacement carries one 2-pin and one 3-pin plug that together form a 3-wire 4-pin interface; the existing header must accept this arrangement. No other mounting dimensions or pinouts are supported by this part.

Steady airflow at rated current

At the specified 0.20 A draw the fan delivers continuous cooling without the current spikes seen in short benchmark runs. The 12 V supply keeps speed stable during extended gaming or compute sessions. Thermal performance remains consistent because the motor operates at its nominal rating rather than a brief boost mode.

أبرز المميزات

  • Direct replacement for MSI R6450 6570 6670 Blizzard V5
  • 45 mm diameter fits tight GPU shrouds
  • 39 mm square hole spacing matches original mounting
  • Dual 2-pin and 3-pin connectors cover both headers
  • Runs on 12 V drawing only 0.20 A

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Does the fan come with mounting screws or do I need to source them separately?

The package contains only the 45 mm replacement fan with its 2-pin and 3-pin connectors; mounting hardware is not included.

My card is an MSI R6570 Blizzard V5 — will the 39 mm hole spacing match?

Yes, the 39 mm mounting pattern is specified for the R6450, R6570 and R6670 Blizzard V5 models.

What does the 12 V 0.20 A rating mean for my graphics card's fan header?

It draws 0.20 A at 12 V, a standard low-power draw that the card's original fan header is designed to supply.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.