暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small 45 mm black plastic graphics card cooling fan with 39 mm square mounting holes and dual 2-pin and 3-pin connectors

SXDOOL

SXDOOL 45 mm MSI R6450 6570 6670 Blizzard V5 graphics card fan 12 V 0.20 A 39 mm hole spacing 2P&3P

SKU CH-00CG-XE4RJ

45 mm replacement fan for MSI R6450, 6570 and 6670 Blizzard V5 cards with 39 mm hole spacing and dual 2P/3P power connectors

  • Direct replacement for MSI R6450 6570 6670 Blizzard V5
  • 45 mm diameter fits tight GPU shrouds
  • 39 mm square hole spacing matches original mounting
  • Dual 2-pin and 3-pin connectors cover both headers
  • Runs on 12 V drawing only 0.20 A

Replacement fan for MSI R6450 6570 6670 Blizzard V5

This 45 mm cooler is built as a direct swap for the original graphics card fan on MSI R6450, 6570 and 6670 Blizzard V5 boards. It runs on 12 V at 0.20 A and uses a combined 2-pin and 3-pin connector layout. The unit suits owners of those specific cards who need a new cooler master FY04510H12SAA assembly.

Check mounting holes and connector layout

Verify that the card’s screw holes sit on a 39 mm by 39 mm by 39 mm pattern before ordering. The replacement carries one 2-pin and one 3-pin plug that together form a 3-wire 4-pin interface; the existing header must accept this arrangement. No other mounting dimensions or pinouts are supported by this part.

Steady airflow at rated current

At the specified 0.20 A draw the fan delivers continuous cooling without the current spikes seen in short benchmark runs. The 12 V supply keeps speed stable during extended gaming or compute sessions. Thermal performance remains consistent because the motor operates at its nominal rating rather than a brief boost mode.

特長

  • Direct replacement for MSI R6450 6570 6670 Blizzard V5
  • 45 mm diameter fits tight GPU shrouds
  • 39 mm square hole spacing matches original mounting
  • Dual 2-pin and 3-pin connectors cover both headers
  • Runs on 12 V drawing only 0.20 A

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the fan come with mounting screws or do I need to source them separately?

The package contains only the 45 mm replacement fan with its 2-pin and 3-pin connectors; mounting hardware is not included.

My card is an MSI R6570 Blizzard V5 — will the 39 mm hole spacing match?

Yes, the 39 mm mounting pattern is specified for the R6450, R6570 and R6670 Blizzard V5 models.

What does the 12 V 0.20 A rating mean for my graphics card's fan header?

It draws 0.20 A at 12 V, a standard low-power draw that the card's original fan header is designed to supply.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。