نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green 1.75 mm filament spool with glossy finish

Taulman 3D

Taulman 3D N-vent Filament 1.75mm 1lb Green 3D printers accessory

SKU CH-0JZY-S93D6

Low-odour, styrene-free filament prints at 250-255°C with clarity, gloss and durable property retention

  • ColorGreen
  • TypeFilament
  • Low-odor and styrene-free for a safer printing environment
  • Clear glossy finish enhances visual quality of printed parts
  • Easy processing reduces print failures and setup time
  • Retains mechanical properties in finished 3D applications
  • Prints at 250-255°C using 1.75mm diameter filament

Taulman 3D N-vent Filament 1.75mm

This green filament is a 3D printing accessory made from Eastman Amphora polymer. It is supplied as a 1lb spool with a 1.75mm diameter. The material prints at 250C to 255C and is designed for makers who want low-odour, styrene-free output with good clarity and gloss.

Makers needing low-odour, tough prints

The filament suits users who prioritise ease of processing and property retention in finished parts. It is not for buyers who require a different filament diameter or a higher temperature range than 250C to 255C. It is also unsuitable for anyone needing a material that contains styrene or produces strong odours during printing.

1lb spool capacity and thermal limits

The 1lb spool provides enough material for multiple small to medium prints. It comfortably handles prints within the 250C to 255C nozzle temperature window. Headroom runs out when a project demands a filament diameter other than 1.75mm or a printing temperature outside the specified range.

أبرز المميزات

  • Low-odor and styrene-free for a safer printing environment
  • Clear glossy finish enhances visual quality of printed parts
  • Easy processing reduces print failures and setup time
  • Retains mechanical properties in finished 3D applications
  • Prints at 250-255°C using 1.75mm diameter filament

المواصفات

Brandtaulman3d
ColorGreen
TypeFilament

أسئلة حول هذا المنتج

Will my printer handle the 250–255 °C nozzle temperature this filament requires?

Your printer must be able to reach and hold 250–255 °C at the hot end; many entry-level machines stop below that range.

Can I leave a partially used spool of this 1.75 mm filament loaded next to other materials?

Yes, the 1.75 mm diameter matches most common spools, so it fits the same holders and feed paths without hardware changes.

How do I know the filament is printing correctly once I start a job?

Look for smooth, glossy green layers with a clear finish and no styrene smell; the low-odor Amphora polymer should extrude cleanly at the set temperature.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.