暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 1.75 mm filament spool with glossy finish

Taulman 3D

Taulman 3D N-vent Filament 1.75mm 1lb Green 3D printers accessory

SKU CH-0JZY-S93D6

Low-odour, styrene-free filament prints at 250-255°C with clarity, gloss and durable property retention

  • ColorGreen
  • TypeFilament
  • Low-odor and styrene-free for a safer printing environment
  • Clear glossy finish enhances visual quality of printed parts
  • Easy processing reduces print failures and setup time
  • Retains mechanical properties in finished 3D applications
  • Prints at 250-255°C using 1.75mm diameter filament

Taulman 3D N-vent Filament 1.75mm

This green filament is a 3D printing accessory made from Eastman Amphora polymer. It is supplied as a 1lb spool with a 1.75mm diameter. The material prints at 250C to 255C and is designed for makers who want low-odour, styrene-free output with good clarity and gloss.

Makers needing low-odour, tough prints

The filament suits users who prioritise ease of processing and property retention in finished parts. It is not for buyers who require a different filament diameter or a higher temperature range than 250C to 255C. It is also unsuitable for anyone needing a material that contains styrene or produces strong odours during printing.

1lb spool capacity and thermal limits

The 1lb spool provides enough material for multiple small to medium prints. It comfortably handles prints within the 250C to 255C nozzle temperature window. Headroom runs out when a project demands a filament diameter other than 1.75mm or a printing temperature outside the specified range.

特長

  • Low-odor and styrene-free for a safer printing environment
  • Clear glossy finish enhances visual quality of printed parts
  • Easy processing reduces print failures and setup time
  • Retains mechanical properties in finished 3D applications
  • Prints at 250-255°C using 1.75mm diameter filament

仕様

Brandtaulman3d
ColorGreen
TypeFilament

この商品に関する質問

Will my printer handle the 250–255 °C nozzle temperature this filament requires?

Your printer must be able to reach and hold 250–255 °C at the hot end; many entry-level machines stop below that range.

Can I leave a partially used spool of this 1.75 mm filament loaded next to other materials?

Yes, the 1.75 mm diameter matches most common spools, so it fits the same holders and feed paths without hardware changes.

How do I know the filament is printing correctly once I start a job?

Look for smooth, glossy green layers with a clear finish and no styrene smell; the low-odor Amphora polymer should extrude cleanly at the set temperature.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。