نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Ten spools of black 2.85mm nylon filament in cardboard box

Taulman 3D

Taulman 3D Nylon Bridge Filament 2.85mm 1lb Black 10 pack 3d printers accessory

SKU CH-A8WK-61A7E

Ten 2.85 mm spools of black nylon filament rated at 4800 PSI tensile strength and 248 % elongation for strong, low-warp prints

  • ColorBlack
  • TypeFilament
  • Less warping than standard nylon for easier printing
  • 4800 PSI tensile strength for durable functional parts
  • 248% elongation absorbs impact without snapping
  • Prints directly on glass with PVA glue adhesion
  • Ten spools included for high-volume production

Nylon Bridge 10-Spool Pack

This Taulman 3D filament bundle delivers ten 1 lb spools of 2.85 mm Nylon Bridge in black. It targets makers who need strong, functional parts and want a nylon that prints more reliably than standard grades. The material bridges the strength of Nylon 645 with easier handling.

Warping And Adhesion Behaviour

Nylon Bridge maintains a tensile strength of 4800 PSI and an elongation at break of 248% during long prints. The formulation reduces water uptake and shrinkage, so layers stay bonded and corners resist curling over many hours. Stronger bed adhesion keeps edges flat without the aggressive warping common in unmodified nylons.

Printer Compatibility Check

Confirm that your printer accepts 2.85 mm filament and can reach the nozzle temperatures required for nylon. A heated bed and the ability to apply PVA glue to a glass surface are needed for the stated adhesion benefits. The spool dimensions and feeder clearance must suit ten 1 lb rolls.

أبرز المميزات

  • Less warping than standard nylon for easier printing
  • 4800 PSI tensile strength for durable functional parts
  • 248% elongation absorbs impact without snapping
  • Prints directly on glass with PVA glue adhesion
  • Ten spools included for high-volume production

المواصفات

Brandtaulman3d
ColorBlack
TypeFilament

أسئلة حول هذا المنتج

How much heat does the 2.85 mm Nylon Bridge filament generate during a long print?

The filament itself produces no heat; heat comes from the hot-end and heated bed you set for nylon temperatures.

What printer hardware is required to use the 2.85 mm diameter spools?

A 3D printer that accepts 2.85 mm filament, a heated bed, and PVA glue on glass for bed adhesion.

Will the 4800 PSI tensile strength parts bond well to older PLA or ABS prints?

Nylon Bridge does not chemically fuse to PLA or ABS; mechanical interlocking or adhesives are needed for mixed-material assemblies.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.