نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

VIVO

VIVO STAND-V102F Dual Monitor Free-Standing Mount 13-30" 17.6 lbs

SKU CH-D6CR-276GT

Freestanding dual-monitor mount holds 13–30 in screens up to 17.6 lbs each on a steel base with full tilt, swivel, rotation and height adjustment

  • Fits two 13-30" screens up to 17.6 lbs each with 75x75mm or 100x100mm VESA
  • +45° to -45° tilt, 180° swivel and 360° rotation with double center joints for flexible placement
  • Height adjustable along 16.4" pole for ergonomic viewing at sitting or standing positions
  • 11" x 15.4" steel base gives stable support on any desk without clamping or drilling
  • Removable VESA plates and included cable clips make installation quick and keep cables tidy

Dual 13-30 inch freestanding monitor mount

The VIVO STAND-V102F supports two screens from 13 to 30 inches, each up to 17.6 lbs, using 75x75mm or 100x100mm VESA patterns. A 16.4 inch steel pole and 11 by 15.4 inch base keep the setup stable on any desk. Arms extend up to 31 inches and allow portrait or landscape orientation. Cable clips are included for a tidy installation.

Replaces clamped or walled dual arms

This floor-standing design removes the need for desk-edge clamps or wall studs, suiting glass tops, shallow surfaces or rented spaces. The jump is worth it when drilling or clamping is impractical but dual-screen ergonomics are still required. Each arm carries a 17.6 lb load without relying on furniture strength. Assembly uses supplied hardware and removable VESA plates.

Sustained stability with full articulation

The steel base resists tipping during daily height, tilt, swivel and rotation adjustments. Double centre joints on each arm maintain position under continuous repositioning without sag. Tilt ranges from +45 to -45 degrees, swivel covers 180 degrees and rotation reaches 360 degrees. Height slides smoothly along the 1.4 inch diameter pole for long-term reliability.

أبرز المميزات

  • Fits two 13-30" screens up to 17.6 lbs each with 75x75mm or 100x100mm VESA
  • +45° to -45° tilt, 180° swivel and 360° rotation with double center joints for flexible placement
  • Height adjustable along 16.4" pole for ergonomic viewing at sitting or standing positions
  • 11" x 15.4" steel base gives stable support on any desk without clamping or drilling
  • Removable VESA plates and included cable clips make installation quick and keep cables tidy

المواصفات

BrandVIVO

أسئلة حول هذا المنتج

What desk footprint does the 11" x 15.4" base of the VIVO STAND-V102F require?

The solid-steel base measures 11 inches deep by 15.4 inches wide, so clear at least that much flat desk space for stable placement.

How do the removable VESA plates attach to monitors with 75x75mm or 100x100mm holes on this mount?

Bolt each plate to the monitor's four VESA holes using the supplied screws, then slide the plates onto the arm brackets until they click into place.

When should the cable-management clips on the VIVO STAND-V102F be repositioned?

Re-route the clips whenever you change the 31" arm span, 180° swivel or 360° rotation to prevent cable strain at the new angle.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.