نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black steel clamp-on reel holder with vertical pole and horizontal support bar for 3D printer filaments

VIVO

VIVO Steel Height Adjustable Clamp-on Reel Holder 3d printers accessory

SKU CH-E6NX-AXJZS

A clamp-on steel spool stand holds up to eight 2.2 lb reels, four 6.6 lb reels or two 11 lb reels with 22 lb total capacity and 26.3 in height adjustment

  • ColorBlack
  • TypeStrand
  • Holds up to eight 2.2 lb reels for easy multi-filament access
  • Supports 22 lbs total weight with durable steel construction
  • Clamps securely to desks up to 3.4 in thick for stable mounting
  • Height adjustable along 26.3 in pole to suit top or side loaded printers
  • Simple four step assembly with included hardware gets you printing fast

VIVO clamp-on reel holder for 3D printing

The VIVO Steel Height Adjustable Clamp-on Reel Holder is a filament management accessory for FDM 3D printers. It mounts to a desk edge with a C-clamp and keeps spools ready beside or above the machine. The steel frame supports up to 22 lbs of filament. It suits hobbyists and small shops that want organised material storage without a separate rack.

Suits printers with top

The clamp fits desktops from .4 to 3.4 in thick and the pole height is 26.3 in. It holds eight 2.2 lb reels, four 6.6 lb reels, or two 11 lb reels. Builders who need more than eight 1 kg spools at once or who work on surfaces thicker than 3.4 in should look at a floor-standing system instead.

Four-step assembly with included hardware

The package contains all bolts, the C-clamp, the 26 in support bar, and printed instructions. Mount the clamp, slide the pole, set the bar height, and tighten the screws. The most common issue is forgetting to level the clamp on an uneven desk edge, which can make the holder wobble under full load.

أبرز المميزات

  • Holds up to eight 2.2 lb reels for easy multi-filament access
  • Supports 22 lbs total weight with durable steel construction
  • Clamps securely to desks up to 3.4 in thick for stable mounting
  • Height adjustable along 26.3 in pole to suit top or side loaded printers
  • Simple four step assembly with included hardware gets you printing fast

المواصفات

BrandVIVO
ColorBlack
TypeStrand

أسئلة حول هذا المنتج

What desk thickness can the clamp attach to?

The C-clamp fits desks from 0.4 to 3.4 inches thick for a stable mount.

Will it hold my existing 1kg and 3kg spools together?

Yes, it holds up to eight 2.2 lb reels, four 6.6 lb reels, or two 11 lb reels simultaneously.

How do I verify the height is set correctly for my top-loaded printer?

Adjust the support bar along the 26.3 inch pole so reels sit above the printer and the total weight stays within the 22 lb limit.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.