نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black metal 2.5 inch SAS SATA drive tray caddy with mounting screws

Vszerda

Vszerda 2.5 inch Hard Drive Tray Caddy DXD9H 0DXD9H for Dell PowerEdge 14th-16th Gen

SKU CH-WHF4-3QJV7

Metal caddy holds one 2.5-inch SAS or SATA drive in Dell PowerEdge 14th- to 16th-generation servers and XC Series appliances

  • ColorBlack
  • Dimensions16.0 in x 10.0 in x 2.5 in
  • Weight0.065 kilograms
  • Package Contentsno
  • Supports 2.5-inch SAS and SATA drives
  • Metal construction protects the drive from deformation
  • Compatible with PowerEdge 14th 15th and 16th generation servers
  • Fits Dell XC series appliances including XC640-4 and XC740xd-24
  • Includes four mounting screws for secure installation

2.5 inch SAS SATA Drive Caddy

This Vszerda tray caddy accepts one 2.5 inch SAS or SATA hard drive or SSD. It is built for Dell PowerEdge servers from the 14th through 16th generations and compatible XC Series appliances. The metal bracket protects the drive and resists deformation during installation and removal. Four mounting screws are included for securing the drive inside the tray.

Fits 14th 15th 16th Gen PowerEdge

The caddy fits a wide range of rack and tower models including R440, R640, R740, R740xd, R840, R940, R650, R750, R750xs, R660, R760 and corresponding XC appliances. It also supports AMD based variants such as R6415, R7415, R7425, R6515, R7515, R7525, R6615, R7615 and R7625. Builders using servers outside these listed generations or non Dell platforms should verify compatibility before purchase.

Hardware Interface SAS SATA

The single decisive specification is the hardware interface which supports both SAS and SATA drives in a 2.5 inch form factor. If the target server bay requires a different drive interface or a 3.5 inch form factor this caddy will not work. The tray provides a direct mechanical and electrical match for the listed PowerEdge and XC systems.

أبرز المميزات

  • Supports 2.5-inch SAS and SATA drives
  • Metal construction protects the drive from deformation
  • Compatible with PowerEdge 14th 15th and 16th generation servers
  • Fits Dell XC series appliances including XC640-4 and XC740xd-24
  • Includes four mounting screws for secure installation

المواصفات

BrandHeretom
ColorBlack
Dimensions16.0 in x 10.0 in x 2.5 in
Weight0.065 kilograms
Package Contentsno

أسئلة حول هذا المنتج

How can I confirm the tray caddy is seated correctly after installing a 2.5-inch SAS or SATA drive in my PowerEdge R740?

Slide the caddy into the drive bay until the latch clicks and the front LED shows activity; the server BIOS should then list the drive on the SAS/SATA controller.

What ships with the Vszerda DXD9H caddy and what must I provide separately?

The package includes one metal 2.5-inch tray caddy and four mounting screws; you must supply the 2.5-inch SAS or SATA hard drive itself.

Which caddy version matches a 15th-generation PowerEdge R750xs versus a 14th-generation R640?

The same DXD9H part number fits both generations — it supports 14th, 15th and 16th-gen PowerEdge servers including the R750xs and R640.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.