نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Four silver compression fittings for 16mm hard tubing

WYYG

WYYG G1/4" Copper Compression Fittings 16mm 4pcs Silver

SKU CH-SW66-JZRFK

Four G1/4" compression fittings secure 16 mm rigid tubing and withstand up to 15 kg of pull force

  • TypeFittings
  • ColorSilver
  • G1/4" threads fit standard liquid-cooling loops
  • Compression design secures 16mm OD hard tubing
  • Brass construction resists corrosion for long life
  • Rated to sustain 15kg drag force without leaks
  • Pack includes four fittings for complete loop assembly

Water-Cooling Fittings for 16mm Tubing

These G1/4-inch copper compression fittings connect 16mm outer-diameter rigid tubing in a custom liquid-cooling loop. The pack contains four silver-coloured pieces made from brass for corrosion resistance. Each fitting uses a compression design that seals without tools and is rated to sustain a drag force of 15kg. They suit builders assembling a high-flow, leak-free hard-line system.

Who Should Use These

The fittings are intended for enthusiasts building a custom water-cooling loop with 16mm hard tubing and G1/4 threaded components. They are not suited for systems using soft tubing, smaller or larger tube diameters, or non-G1/4 thread standards. Buyers needing angled, rotary or quick-disconnect styles will require different fittings.

Deciding Specification

The critical specification is the 16mm outer-diameter tubing compatibility combined with the G1/4 thread size. If the loop uses any other tube diameter or thread pitch these fittings will not fit and cannot be adapted.

أبرز المميزات

  • G1/4" threads fit standard liquid-cooling loops
  • Compression design secures 16mm OD hard tubing
  • Brass construction resists corrosion for long life
  • Rated to sustain 15kg drag force without leaks
  • Pack includes four fittings for complete loop assembly

المواصفات

TypeFittings
ColorSilver

أسئلة حول هذا المنتج

Will the G1/4" threads on these fittings match the standard ports on my existing water blocks and radiators?

Yes, the G1/4" thread is the industry standard for PC water-cooling components, so they will screw directly into the ports on your current blocks, radiators and reservoirs.

How can I verify the compression seal is holding after I assemble the loop with 16mm hard tubing?

Pressurise the loop with a leak tester and watch the pressure gauge; a steady reading with no drips at the four silver fittings confirms the high-flow, leak-free structure is working.

The pack lists four fittings — are any extra O-rings, tubing inserts or tools included?

The box contains only the four G1/4" compression fittings; spare O-rings, tubing chamfer tools or cutting tools for the 16mm rigid tubing must be purchased separately.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.